topic Re: iMX8QM UUU Tool in i.MX Processors

iMX8QM UUU Tool

prashanthkumar — Thu, 07 Feb 2019 15:54:20 GMT

Hi,

We are working on iMX8 Quad Max custom board with 4.14.78 Kernel.

For flashing to eMMC , we are using MFG Tool(UUU)" from below link.

GitHub - NXPmicro/mfgtools: Freescale/NXP I.MX Chip image deploy tools.

The UUU script file is attached for your reference.

But while flashing its unable to proceed/move further steps as shown below.

user@root$ sudo ./uuu -v ./partition.uuu
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.0-0-g194351b
Build in config:
   Pctl   Chip       Vid   Pid   BcdVersion
   ==================================================
   SDPS:   MX8QXP        0x1fc9   0x012f   0x0002
   SDPS:   MX8QM       0x1fc9   0x0129   0x0002
   SDP:       MX7D          0x15a2   0x0076
   SDP:   MX6Q            0x15a2   0x0054
   SDP:   MX6D            0x15a2   0x0061
   SDP:   MX6SL          0x15a2   0x0063
   SDP:       MX6SX          0x15a2   0x0071
   SDP:       MX6UL          0x15a2   0x007d
   SDP:       MX6ULL       0x15a2   0x0080
   SDP:       MX6SLL       0x1fc9   0x0128
   SDP:       MX7ULP        0x1fc9   0x0126
   SDP:       MXRT106X    0x1fc9   0x0135
   SDP:       MX8MM       0x1fc9   0x0134
   SDP:   MX8MQ       0x1fc9   0x012b
   SDPU:    SPL              0x0525   0xb4a4
   FBK:                         0x066f   0x9afe
   FBK:                         0x066f   0x9bff
   FB:                           0x0525   0xa4a5
   FB:                           0x18d1   0x0d02
Wait for Known USB Device Appear
New USB Device Attached at 1:8
1:8>Start Cmd:SDPS: boot -f flash_mfg.bin
100%1:8>Okay
New USB Device Attached at 1:8
1:8>Start Cmd:FB: ucmd setenv fastboot_dev mmc
1:8>Okay
1:8>Start Cmd:FB: ucmd setenv mmcdev 0
1:8>Okay
1:8>Start Cmd:FB: ucmd mmc dev 0
1:8>Okay
1:8>Start Cmd:FB: ucmd setenv fastboot_buffer ${loadaddr}
1:8>Okay
1:8>Start Cmd:FB: download -f Image_MFG
1:8>Okay
1:8>Start Cmd:FB: ucmd setenv fastboot_buffer ${fdt_addr}
1:8>Okay
1:8>Start Cmd:FB: download -f fsl-imx8qm-iwg27m_mfg.dtb
1:8>Okay
1:8>Start Cmd:FB: ucmd setenv fastboot_buffer ${initrd_addr}
1:8>Okay
1:8>Start Cmd:FB: download -f fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot
1:8>Okay
1:8>Start Cmd:FB: acmd ${kboot} ${loadaddr} ${initrd_addr} ${fdt_addr}
1:8>Okay

Kindly suggest solution to resolve UUU tool flash issue.

Regards,

Pashanth Kumar K

Re: iMX8QM UUU Tool

igorpadykov — Fri, 08 Feb 2019 06:03:43 GMT

Hi Pashanth

one can follow sect.4.2 Universal update utility attached Linux Guide

and use uuu scripts included in Demo Image

Linux Binary Demo Files - i.MX 8QMax MEK

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: iMX8QM UUU Tool

prashanthkumar — Wed, 13 Feb 2019 14:17:29 GMT

Hi,

I followed sect.4.2 Universal update utility, and enabled Uboot & Kernel setup config file macros given below.

Uboot - Inside defconfig file

----------------------------------------

CONFIG_CMD_FASTBOOT=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_FSL_FASTBOOT=y
CONFIG_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82800000
# Address need change according ←
system, generally it can be the same as ${LOADADDR}
CONFIG_FASTBOOT_BUF_SIZE=0x40000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_EFI_PARTITION=y
CONFIG_ANDROID_BOOT_IMAGE=y

Kernel - Inside defconfig file

-----------------------------------------

CONFIG_USB_CONFIGFS=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_OF=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_PHY=y
CONFIG_GENERIC_PHY=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHYLIB=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_FSL_UTP=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_SYSFS=y

Also used "example_kernel_emmc.uuu" script from release Linux Binary Demo Files - i.MX 8QMax MEK .

But still I am facing same flashing issue in UUU tool.

Regards,

Prashanth Kumar K

Re: iMX8QM UUU Tool

prashanthkumar — Wed, 13 Feb 2019 15:29:26 GMT

Hi,

Is there any additional/extra changes need for uboot & kernel configuration?

Regards,

Prashanth Kumar K

Re: iMX8QM UUU Tool

igorpadykov — Thu, 14 Feb 2019 00:04:07 GMT

i.MX 8 Universal Update Utility (UUU) Tools and Pins Tool

one can try attached script.

Best regards
igor

Re: iMX8QM UUU Tool

prashanthkumar — Fri, 22 Feb 2019 09:24:39 GMT

Hi Igor,

Still I am facing same issue in given UUU script while flashing the emmc.

Best Regards,

Prashanth Kumar K

Re: iMX8QM UUU Tool

igorpadykov — Fri, 22 Feb 2019 10:13:44 GMT

Hi Prashanth

please try with NXP i.MX8QM EVK board.

Best regards
igor

Re: iMX8QM UUU Tool

prashanthkumar — Fri, 22 Feb 2019 10:38:54 GMT

Hi Igor,

We don't have NXP i.MX8QM EVK board here for testing.

Best Regards,

Prashanth Kumar K

Re: iMX8QM UUU Tool

igorpadykov — Fri, 22 Feb 2019 11:53:28 GMT

Hi Prashanth

had you run i.MX8QM ddr test on custom board.

i.MX 8 DRAM Introduction and Tools Overview Plu... | NXP Community

In general procedure is similar as for i.MX8M

i.MX8MSCALE DDR Tool Release

Best regards
igor

Re: iMX8QM UUU Tool

prashanthkumar — Fri, 22 Feb 2019 12:32:39 GMT

Hi Igor,

We did DDR stress test on i.MX8QM custom board. That is getting passed with 1200MHz LPDDR4 frequency.

Whether DDR will effect to flashing using UUU tool ?

Best regards

prashanth Kumar K

Re: iMX8QM UUU Tool

igorpadykov — Fri, 22 Feb 2019 14:13:00 GMT

Hi Prashanth

had you rebuilt image for custom board with new ddr settings (found from ddr test), put them in dcd header

imx-scfw-porting-kit/src/scfw_export_mx8qm_b0/platform/board/mx8qm_mek/dcd

SCFW Porting Kit

Best regards
igor

Re: iMX8QM UUU Tool

prashanthkumar — Mon, 25 Feb 2019 10:16:25 GMT

Hi Igor,

We rebuilt image for custom board with new ddr settings & tested, same observation for UUU Tool flash.

Best regards

prashanth Kumar K

Re: iMX8QM UUU Tool

igorpadykov — Mon, 25 Feb 2019 10:54:13 GMT

Hi Prashanth

so, what is "observation" - any logs/messages/steps.

Are you able to run: uuu flash.bin (new generated uboot image),

as described in sect.3.1.2 Download boot loader for imx8qxp attached document.

Best regards
igor

Re: iMX8QM UUU Tool

nandish_sg — Sat, 23 May 2020 07:09:37 GMT

Hello Prashanth.

Are you able to flash the Linux images on eMMC using UUU tool, Because i am also facing the same issue but my board is Evaluation board iMX 8QuadMax MEK, and images are Linux Yocto (5.4 kernel version), i am using the latest UUU tool 1.3.154. if it your issue is resolved please let me know what is the procedure to flash the images on eMMC,

for your reference https://community.nxp.com/thread/532952 ,

Thanks in advance ,

Best Regards

SGN