Error when building System Control Firmware

anjalikkrishna — Thu, 04 Apr 2019 15:21:52 GMT

Hi,

I am trying to build the scfw source code with few changes related to resource allocation . I have followed the below link

System Controller Firmware 101 - Resource management service

and issued

the below command

./$(MKIMG) -soc QX -rev B0 -append ahab-container.img -c -flags 0x00200000 -scfw scfw_tcm.bin -ap u-boot-atf.bin a35 0x80000000 -p3 -m4 m40_tcm.bin 0 0x34FE0000 -out flash.bin

But I am getting the error as unrecognized option -p3

Any help would be appreciated.

Re: Error when building System Control Firmware

Yuri — Fri, 05 Apr 2019 06:10:17 GMT

Hello,

Please try to load the recent scfw package:

https://www.nxp.com/webapp/Download?colCode=L4.14.78_1.0.0_SCFWKIT&appType=license&location=null

Summary Page:

i.MX Software | NXP

It contains documentation. Please refer to Chapter 3 (Porting Guide) of "sc_fw_port.pdf".

Have a great day,
Yuri

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Error when building System Control Firmware in i.MX Processors

Error when building System Control Firmware

Re: Error when building System Control Firmware