i.MX ProcessorsのトピックRe: imx7S Pinmux Tool Question? https://community.nxp.com/t5/i-MX-Processors/imx7S-Pinmux-Tool-Question/m-p/879466#M133356 <HTML><HEAD></HEAD><BODY><P>Hi Hazar</P><P></P><P>yes processor supports it as described in sect.8.1 External Signals</P><P>and Pin Multiplexing i.MX7S Reference Manual </P><P><A href="http://cache.nxp.com/files/32bit/doc/ref_manual/IMX7SRM.pdf" target="test_blank">http://cache.nxp.com/files/32bit/doc/ref_manual/IMX7SRM.pdf</A></P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 01 Feb 2019 23:42:08 GMT igorpadykov 2019-02-01T23:42:08Z imx7S Pinmux Tool Question? https://community.nxp.com/t5/i-MX-Processors/imx7S-Pinmux-Tool-Question/m-p/879465#M133355 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P><BR />I have noticed that CCM_CLKO2 signal is not available on GPIO_IO3 or SD1_WP pad for&nbsp; MCIMX7S3EVK08SC device at Pins for iMX Tool V5. Is it only missing from the tool or the device itself doesn't support it?</P><P></P><P>Thank you in advance,</P><P><BR />Regards,</P><P><BR />Hazar</P></BODY></HTML> Fri, 01 Feb 2019 15:37:45 GMT https://community.nxp.com/t5/i-MX-Processors/imx7S-Pinmux-Tool-Question/m-p/879465#M133355 hazar_mutgan 2019-02-01T15:37:45Z Re: imx7S Pinmux Tool Question? https://community.nxp.com/t5/i-MX-Processors/imx7S-Pinmux-Tool-Question/m-p/879466#M133356 <HTML><HEAD></HEAD><BODY><P>Hi Hazar</P><P></P><P>yes processor supports it as described in sect.8.1 External Signals</P><P>and Pin Multiplexing i.MX7S Reference Manual </P><P><A href="http://cache.nxp.com/files/32bit/doc/ref_manual/IMX7SRM.pdf" target="test_blank">http://cache.nxp.com/files/32bit/doc/ref_manual/IMX7SRM.pdf</A></P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 01 Feb 2019 23:42:08 GMT https://community.nxp.com/t5/i-MX-Processors/imx7S-Pinmux-Tool-Question/m-p/879466#M133356 igorpadykov 2019-02-01T23:42:08Z