i.MX ProcessorsのトピックAbout surround view application

About surround view application

xu_ji1 — Mon, 01 Apr 2019 01:15:08 GMT

Hello，

I have I.MX8QXP board，does the surround view application can porting on it？is there any guide for the application on IMX8QXP？

Thanks

Re: About surround view application

Rita_Wang — Tue, 02 Apr 2019 03:50:39 GMT

Hi,

There is Surround View Application | NXP in our website, you can refer to it.

Have a nice day

Rita

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: About surround view application

xu_ji1 — Tue, 02 Apr 2019 08:21:32 GMT

Dears,

From doc it is for I.MX8QM,does I.MX8QXP can used the resource(SW/guide and so on)?

Thanks

Re: About surround view application

Rita_Wang — Fri, 12 Apr 2019 03:23:12 GMT

Hi,

I have the reply from our expert, The application guides are Surround View Application Reference Manual and Surround View Application User's Guide on Surround View Application | NXP. i.MX8QXP has supported the max9286 driver. You can run the demo on i.MX8QXP mek board. If you have question you can create new case and contact us.

Hope this can do help for you.

Have a nice day

Rita

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!