i.MX ProcessorsのトピックIMX512 Flash

IMX512 Flash

ajayachandran — Fri, 20 Jul 2018 06:34:20 GMT

Hi ,

I am trying to flash my MCIMX512CJM6C in advanced toolkit through usb port in mode HAB

But i am getting an error "No usb detected"

I have made usb type a connection as below

USB Pin 1- USB_OTG_VBUS
USB Pin 2-USB_OTG_D_N
USB Pin 3-USB_OTG_D_P
USB Pin 4-GND

but IMX512 is detecting in my pc in device manager it listing as SE Blank Elvis

is there any driver needs to be installed to detect imx512?

Please help me out to detect my imx512 to flash

Regards,

Arun

Re: IMX512 Flash

igorpadykov — Sat, 21 Jul 2018 00:09:47 GMT

Hi Arunprasath

one can check usb recommendations in Chapter 22 Porting USB Host1 and USB OTG
https://www.nxp.com/docs/en/user-guide/MX53UG.pdf

Try with i.MX53 QSB board or with mfg tool on

i.MX537 Processors|HD Video|NXP

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: IMX512 Flash

ajayachandran — Wed, 25 Jul 2018 06:23:10 GMT

Hi Igor,

I have access to only

USB_OTG_VBUS
USB_OTG_D_N
USB_OTG_D_P
USB_OTG_ID
GND

Regards,

Arun

Re: IMX512 Flash

igorpadykov — Thu, 26 Jul 2018 00:01:34 GMT

Hi Arunprasath

it should work with that configuration. Also one can connect through usb hub.

Best regards
igor

Re: IMX512 Flash

ajayachandran — Fri, 27 Jul 2018 10:04:07 GMT

Hi Igor,

USB Pin 1- USB_OTG_VBUS
USB Pin 2-USB_OTG_D_N
USB Pin 3-USB_OTG_D_P
USB Pin 4-GND

the above connection is enough? in that case why in device manager it listing as SE Blank Elvis

USB_OTG_ID require any connection ?

Regards,

Arun

Re: IMX512 Flash

igorpadykov — Fri, 27 Jul 2018 23:35:44 GMT

Hi Arunprasath

USB_OTG_ID does not require any connection.

Best regards
igor

Re: IMX512 Flash

ajayachandran — Tue, 31 Jul 2018 09:46:34 GMT

Hi Igor,

then why in device manager it listing as SE Blank Elvis?

Do i need to install any driver?

Regards,

Arun

Re: IMX512 Flash

igorpadykov — Tue, 31 Jul 2018 23:22:29 GMT

Hi Arunprasath

"SE Blank Elvis" is message provided by ROM,

in general you can ignore it. No need to install additional drivers.

Best regards
igor

Re: IMX512 Flash

ajayachandran — Tue, 11 Dec 2018 13:38:14 GMT

i could make it work with windows XP but its doesnot work with windows 7