i.MX ProcessorsのトピックRe: imx6solo DDR

imx6solo DDR

1182614726 — Mon, 24 Dec 2018 08:44:52 GMT

Dear all,

my board is imx6solo, now i'm using DDR_Stress_Tester_V1.0.3 tools to calibrate DDR, but now the tool seems to dead.

please see the attachment for more information.

when i input the DDR frequence for 400 MHz, the tool will be dead.

wo now use two DDR, each DDR is 256MB, the type is

MT41K128M16JT-125:K

can you help me? thank you very much

Re: imx6solo DDR

igorpadykov — Mon, 24 Dec 2018 23:02:29 GMT

Hi qiang

one can try latest revision of tools

i.MX6/7 DDR Stress Test Tool V3.00

please pay attention to FAQ section, it explains some issues.

Also may be useful to check tutorial below

DRAM Controller Optimization for i.MX Application Processors

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: imx6solo DDR

1182614726 — Sat, 05 Jan 2019 02:44:59 GMT

Hi igorpadykov,

the problem has been solved, the releason is not revison, thank you very much

Re: imx6solo DDR

srikittu34 — Sat, 05 Jan 2019 11:23:13 GMT

hello 1182614726@qq.com can you please give me guidance about how to do ddr3 stress test for imx6 solo board..i am new to this field..

thanks and regards

srikirshna

Re: imx6solo DDR

1182614726 — Tue, 08 Jan 2019 06:01:28 GMT

you can do this refer to the ddr3 stress tool guidance, do you have the specific question?