topic Sgtl5000 Audio Codec Config in i.MX Processors

Sgtl5000 Audio Codec Config

ahmedhafez — Mon, 12 Nov 2018 11:21:41 GMT

Hello

I have some questions about how to Successfully configure Sgtl5000 audio codec .

if i can use I2C communication without connecting VDDD if yes then i will connect VDDD to Ground or not?

If i can connect VDDA , VDDIO , VDDD to the same voltage source like 1.8 volt ?

could you guide me . how to use Crystal to provide MCLK ?

i try a lot to configure the Sgtl5000 audio codec through reading the chip ID but i can't could you guide me step by step from scratch ?

Thanks and best regards

Re: Sgtl5000 Audio Codec Config

igorpadykov — Thu, 15 Nov 2018 00:01:11 GMT

Hi ahmed

please look at sgtl5000 documentation and programming guides on

Ultra-Low-Power Audio Codec|NXP

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------