topic Re: i.MX53 Quick Start Board Hands-On training in i.MX Processors

i.MX53 Quick Start Board Hands-On training

rlorriaux — Thu, 31 Mar 2011 18:52:54 GMT

This is the Hands-On, i.MX53 Quick Start Linux/Android Training from Adeneo Embedded.

The slides are attached in this post (see PDF below). Last update: May 20, 2011
The instructions on how to set up a development environment can be found in the following post:
http://imxcommunity.org/group/imx53quickstartboard/forum/topics/preparing-ubuntu-1010-for
To register for a class near you, or request a class in your city, go here:
http://www.freescale.com/webapp/sps/site/training_information.jsp?code=SEM_IMX_ANDROIDLINUX

Re: i.MX53 Quick Start Board Hands-On training

JimDonelson — Thu, 31 Mar 2011 19:19:08 GMT

Thanks. Are the flashing scripts mentioned on page 110 available for download? I would like to try out Android on my QS board and it would be helpful.

Re: i.MX53 Quick Start Board Hands-On training

JesseDannenbrin — Tue, 12 Apr 2011 16:33:39 GMT

You can get the flashing scripts from our latest release(3.3) of Android for the QS board available at:

http://www.adeneo-embedded.com/en/Products/Board-Support-Packages/Freescale-i.MX53-QSB

Just click the download link and register for free. Once you've registered and signed in you can hit the download button again to receive FTP access to the Android BSP.

You should find the script in the 'scripts' folder once you've unpacked the i.MX53-QSB-Android-Release3.3.tar.gz file. A limitation of the flashing script is that it doesn't use the entire SD partition and requires a micro SD card that is >=2GB.

Note that there is 1 script for flashing the prebuilt binaries, and 1 for flashing binaries built from source using the provided scripts for building the QS board. This info is also available in the release notes which will be available to you once you have FTP access.

Jim Donelson said:

Thanks.
Are the flashing scripts mentioned on page 110 available for download?
I would like to try out Android on my QS board and it would be helpful.

Re: i.MX53 Quick Start Board Hands-On training

LuisRivera — Thu, 07 Jun 2012 00:00:57 GMT

Hi, How can I do to request a class in Mexico city? because the link http://www.freescale.com/webapp/sps/site/training_information.jsp?c... its broken.

I'm interested on a one-day workshop.

Best regards,

Luis Rivera