i.MX ProcessorsのトピックBuild IMAX8M Yocto environment task error problem!!!!

Build IMAX8M Yocto environment task error problem!!!!

egbert8165 — Wed, 19 Dec 2018 01:43:59 GMT

Hi NXP Team,

I executed the bitbake fsl-image-qt5-validation-imx command following instructions but found a problem (reger below Figure).

After executing the bitbake-c fetchall fsl-image-qt5-validation-imx command and executed the bitbake fsl-image-qt5-validation-imx to rebuilding it, the following error message still appears. How can I solve this problem? (refer below Figure )

Egbert Liu

Re: Build IMAX8M Yocto environment task error problem!!!!

igorpadykov — Fri, 21 Dec 2018 01:32:07 GMT

Hi Egbert

for building image with QT5 one can look on

wayland image with QT5 fails to build on Yocto Rocko for i.mx8m

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------