https://community.nxp.com/t5/i-MX-Processors/Debian-on-imx6/m-p/795420#M123132 <HTML><HEAD></HEAD><BODY><P>Hi oussama,</P><P></P><P>Check the SW of the board that to boot is from SDcard.</P></BODY></HTML> Mon, 26 Nov 2018 14:51:15 GMT Bio_TICFSL 2018-11-26T14:51:15Z https://community.nxp.com/t5/i-MX-Processors/Debian-on-imx6/m-p/795419#M123131 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P><SPAN style="color: #51626f; background-color: #ffffff;">I am using NXP's iMX6 board and i am trying to install a debian on it.</SPAN></P><P></P><P><SPAN style="color: #51626f; background-color: #ffffff;">I followed&nbsp;<A href="https://community.nxp.com/docs/DOC-95044">Debian on the i.MX6 sabre sd platform in a few commands</A>&nbsp;but i did not succed.</SPAN></P><P></P><P><SPAN style="color: #51626f; background-color: #ffffff;">I can't force the board to boot from the sd card&nbsp;even after putting putting the u-boot with a 1024 offset as it is said here&nbsp;<A href="https://community.nxp.com/docs/DOC-95015">u-boot on the i.MX6 sabre sd platform in a few commands</A>&nbsp;</SPAN></P><P></P><P><SPAN style="color: #51626f; background-color: #ffffff;">Any ideas to where my problem may come from ?</SPAN></P><P></P><P><SPAN style="color: #51626f; background-color: #ffffff;">Thanks.&nbsp;</SPAN></P></BODY></HTML> Fri, 23 Nov 2018 11:39:40 GMT https://community.nxp.com/t5/i-MX-Processors/Debian-on-imx6/m-p/795419#M123131 obenbelhassen 2018-11-23T11:39:40Z https://community.nxp.com/t5/i-MX-Processors/Debian-on-imx6/m-p/795420#M123132 <HTML><HEAD></HEAD><BODY><P>Hi oussama,</P><P></P><P>Check the SW of the board that to boot is from SDcard.</P></BODY></HTML> Mon, 26 Nov 2018 14:51:15 GMT https://community.nxp.com/t5/i-MX-Processors/Debian-on-imx6/m-p/795420#M123132 Bio_TICFSL 2018-11-26T14:51:15Z