topic Re: fail to update android9.0 by uuu tool in i.MX Processors

fail to update android9.0 by uuu tool

zbm030823 — Wed, 12 Dec 2018 06:00:07 GMT

Hi everyone,

when i use uuu tool to update android9.0,there is one error happened as follow:
Wait for Known USB Device Appear...
>Start Cmd:CFG: FB: -vid 0x1fc9 -pid 0x0129
>Okay
New USB Device Attached at 7:6
7:6 >Start Cmd: FB: ucmd setenv fastboot_dev mmc

7:6 >Fail Bulk<W>:LIBUSB_ERROR_NOT_FOUND
<-[?25h

Re: fail to update android9.0 by uuu tool

diegoadrian — Wed, 12 Dec 2018 16:04:16 GMT

Hello,

Unfortunately, the Android 9 and the UUU tool are still in Beta mode, we do not have support until the software is officially released. I apologize for the inconveniences this could give to you.

Best Regards,

Diego.

Re: fail to update android9.0 by uuu tool

hangxie — Tue, 01 Jan 2019 12:34:30 GMT

we have the same problem, mark & wait for a solution.

E:\IMX8\android_p9.0.0_1.0.0-beta_image_8qmek>uuu.exe uuu-android-mx8qm-mek-emmc.lst
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.39-4-g219e333

Success 0 Failure 1

1/ 0 [ ]
1:6 1/21 [Bulk(W):LIBUSB_ERROR_NOT_FOU] FB: ucmd setenv fastboot_dev mmc

Re: fail to update android9.0 by uuu tool

dav1 — Tue, 08 Jan 2019 17:53:30 GMT

same here, but with the 'L4.14.78_1.0.0_MX8MQ' release.

@diegoadrian what's a good alternative until the uuu support is sorted?

Re: fail to update android9.0 by uuu tool

yangbaojian — Sat, 12 Jan 2019 02:15:09 GMT

我也遇到了，同样的问题，请问有大神解决的吗？分享一下

E:\project\imx8\mfgtool\tools\uuu>uuu.exe uuu-android-mx8qxp-mek-emmc.lst
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.56-0-g68a9c5d

Your console don't support VT mode, fail back to verbose mode
Build in config:
        Pctl     Chip            Vid     Pid     BcdVersion
        ==================================================
        SDPS:    MX8QXP          0x1fc9 0x012f [0x0002..0xffff]
        SDPS:    MX8QM           0x1fc9 0x0129 [0x0002..0xffff]
        SDP:     MX7D            0x15a2 0x0076
        SDP:     MX6Q            0x15a2 0x0054
        SDP:     MX6D            0x15a2 0x0061
        SDP:     MX6SL           0x15a2 0x0063
        SDP:     MX6SX           0x15a2 0x0071
        SDP:     MX6UL           0x15a2 0x007d
        SDP:     MX6ULL          0x15a2 0x0080
        SDP:     MX6SLL          0x1fc9 0x0128
        SDP:     MX7ULP          0x1fc9 0x0126
        SDP:     MXRT106X        0x1fc9 0x0135
        SDP:     MX8MM           0x1fc9 0x0134
        SDP:     MX8MQ           0x1fc9 0x012b
        SDPU:    SPL             0x0525 0xb4a4 [0x0000..0x04ff]
        SDPV:    SPL1            0x0525 0xb4a4 [0x0500..0xffff]
        SDPV:    SPL1            0x0525 0xb4a5
        FBK:                     0x066f 0x9afe
        FBK:                     0x066f 0x9bff
        FB:                      0x0525 0xa4a5
        FB:                      0x18d1 0x0d02
Wait for Known USB Device Appear...
>Start Cmd:CFG: FB: -vid 0x1fc9 -pid 0x012f
>Okay
New USB Device Attached at 1:3
1:3>Start Cmd:FB: ucmd setenv fastboot_dev mmc
1:3>Fail Bulk(W):LIBUSB_ERROR_NOT_FOUND

Re: fail to update android9.0 by uuu tool

hangxie — Mon, 14 Jan 2019 07:17:09 GMT

Maybe your chip version is A0, Only MfgTool supports this early version only.

Re: fail to update android9.0 by uuu tool

diegoadrian — Mon, 14 Jan 2019 14:41:45 GMT

Hello,

For the moment we do not have support for the L4.14.78 release, what I recommend you to use, is load the Yocto image through a Linux OS based machine with the command dd. For the moment, this is the easiest way that comes to my mind. Hope it can help you.

Best Regards,

Diego.

Re: fail to update android9.0 by uuu tool

yangbaojian — Tue, 15 Jan 2019 02:55:04 GMT

Maybe,you are right! Because the product date of my demo board is 2018.03.09.

Thank you very much!

Re: fail to update android9.0 by uuu tool

fushi_peng — Thu, 31 Jan 2019 07:32:26 GMT

If you did not have fastboot.exe , then you should download it from below.

SDK Platform Tools release notes | Android Developers

Add the path of fastboot.exe into your PC "path environment variable ".

Then download P9.0.0_1.0.0_GA tools and source at Android OS for i.MX Applications Processors|NXP .

In GA release , there is one uuu_imx_android_flash.bat , you can try this bat file.

Re: fail to update android9.0 by uuu tool

张三123 — Mon, 08 Apr 2019 09:26:08 GMT

hello ,

what does the "A0" mean ? it's the CPU Serial code ?

how to check my device is "A0" or not ?

thanks very much!

Re: fail to update android9.0 by uuu tool

abhilashyarrago — Thu, 23 May 2019 14:14:09 GMT

I am also getting the same issue with L4.14.78_1.0.0_MX8MQ release

Is there any way to flash into emmc other than Mfgtool & uuu

I am unable to flash into emmc through fastboot_imx_flashall.sh

getting the following

flash the file of partition-table.img to the partition of gpt
< waiting for device >

How can I enable my device (imx8mq) into fastboot mode

and when I tried to unlock the device I am getting following print

Usage:

fastboot <USB_controller>

- run as a fastboot usb device

Thank you very much,

Abhilash

Re: fail to update android9.0 by uuu tool

sunithas — Tue, 17 Mar 2020 13:04:15 GMT

Still facing the same issue

1:13 1/21 [unrecognized command ] FB: ucmd setenv fastboot_dev mmc

Re: fail to update android9.0 by uuu tool

13660284951 — Thu, 23 Apr 2020 05:52:12 GMT

anybody had solved this issue?

it is very wasted too many time to flash image use sdcard......