topic Re: Can not download imgs using mfgtools in i.MX Processors

Can not download imgs using mfgtools

sunzhangyang — Fri, 08 Dec 2017 06:39:18 GMT

I do a board with imx6ull myself, but i can not download imgs using mfgtools , so i want to know how to do when download imgs firstly. I must use jlink the firstly downlod?

thanks

Re: Can not download imgs using mfgtools

igorpadykov — Fri, 08 Dec 2017 10:12:50 GMT

Hi sun

for mfg tools usage one can look at presentation

AMF-ACC-T1652

for custom board first it is necessary to run ddr test

i.MX6/7 DDR Stress Test Tool V2.70

then rebuild mfg tools firmware, it is described in linux documentation on

i.MX 6 / i.MX 7 Series Software and Development Tool|NXP

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Can not download imgs using mfgtools

sunzhangyang — Mon, 11 Dec 2017 01:10:42 GMT

hi igorpadykov,

PC Jump to Boot ROM if configured as download mode or empty boot device, so how to enter download mode for imx6ull and is my custom board a empty boot device when burning the firmware using Mfgtool firstly?

thanks

Re: Can not download imgs using mfgtools

sunzhangyang — Mon, 11 Dec 2017 01:11:44 GMT

thanks for you reply ,igor

Re: Can not download imgs using mfgtools

igorpadykov — Mon, 11 Dec 2017 05:12:58 GMT

please look at Boot Chapter of i.MX6ULL Reference Manual

http://www.nxp.com/docs/en/reference-manual/IMX6ULLRM.pdf

Best regards
igor