topic Re: how to interface esp32 with imx6 reference board using uart? in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767405#M119186 <HTML><HEAD></HEAD><BODY><P>hi,</P><P>i enabled UART5 port in imx6 reference board, ttymxc4 is being visibled in dev folder. How can we test that enabled UART5 is working properly or not?</P></BODY></HTML> Fri, 02 Feb 2018 05:49:53 GMT bhagavankoppaka 2018-02-02T05:49:53Z how to interface esp32 with imx6 reference board using uart? https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767403#M119184 <HTML><HEAD></HEAD><BODY><P>can anyone direct me in this topic...</P></BODY></HTML> Mon, 08 Jan 2018 16:57:08 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767403#M119184 bhagavankoppaka 2018-01-08T16:57:08Z Re: how to interface esp32 with imx6 reference board using uart? https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767404#M119185 <HTML><HEAD></HEAD><BODY><P>Hi Bhagavan</P><P></P><P>please look at simple bare metal tests</P><P>Github SDK<BR /><A href="https://github.com/backenklee/swp-report/tree/master/iMX6_Platform_SDK">https://github.com/backenklee/swp-report/tree/master/iMX6_Platform_SDK</A></P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Mon, 08 Jan 2018 23:11:27 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767404#M119185 igorpadykov 2018-01-08T23:11:27Z Re: how to interface esp32 with imx6 reference board using uart? https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767405#M119186 <HTML><HEAD></HEAD><BODY><P>hi,</P><P>i enabled UART5 port in imx6 reference board, ttymxc4 is being visibled in dev folder. How can we test that enabled UART5 is working properly or not?</P></BODY></HTML> Fri, 02 Feb 2018 05:49:53 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-interface-esp32-with-imx6-reference-board-using-uart/m-p/767405#M119186 bhagavankoppaka 2018-02-02T05:49:53Z