i.MX ProcessorsのトピックRe: i.MX8 SCU configurations

i.MX8 SCU configurations

shabeerbadarudh — Fri, 10 Nov 2017 14:35:47 GMT

Hi All,

We are using i.MX8 for a new product. Let me help to clear my queries!

1. I have got SC FW APIs doc and "NXP MakeSCD Tool Guide" from freescale community but didn't find the "MakeSCD tool". From where will we get the tool?
2. If we want to assign a peripheral (for example I2C) to M4 core , do we need to assign it using SCI FW API in u-boot or need to configure using MakeSCD utility.
3. I have seen SC FW APIs in Linux source code also. Does it mean SCI APIs will work on linux and similar OSes(QNX,Integrity etc.)?

Thanks in Advance,

Shabeer

Re: i.MX8 SCU configurations

Yuri — Sun, 12 Nov 2017 23:27:45 GMT

Hello,

IMX8 is not supported yet publically.

Regards,

Yuri.

Re: i.MX8 SCU configurations

shabeerbadarudh — Mon, 13 Nov 2017 07:17:00 GMT

Hi Yuri,

Let me know when will be the approximate planned date?

Thanks,

Shabeer.

Re: i.MX8 SCU configurations

Yuri — Mon, 27 Nov 2017 09:01:50 GMT

Hello,

Sorry, this information also is not available publically.

You may create request or apply to local NXP representative for more information.

Regards,

Yuri.