i.MAX6Q Debugging using Segger J-Link JTAG

peteramond — Mon, 02 Apr 2018 13:13:25 GMT

Hi All,

I'm trying to debug u-boot i.MAX6 Quad processor based custom hardware design using j-link Ultra +

According to this link >> https://boundarydevices.com/debugging-using-segger-j-link-jtag/

I followed the steps.

I'm trying to work on Linux 64bit OS.

I already installed J-Link tools (J-Link Commander V6.30g)

And using JLinkExe and JLinkGDBServer for making connection with target and host.

And using grapgicla IDE as Eclipse IDE for U-Boot debugging.

Please read the following information and please answer my questions.

1) JLinkExe connection was successful. Look following images. Is this Device name MCIMX6Q4 correct for processor i.MAX6Q ? (Manufacturer part number - MCIMX6Q6AVT10AC)

2) And JLinkGDBServer connection was established.

3) And did the debug configurations correctly in Eclipse correctly.

4) But when I'm hit debugging I got following error message. Can you guide me on this issue ?

5) And also I'm getting the following issue with Windows 10 OS when I hit the Debug function. With the same Eclipce IDE.

I must be thankful to you if you will kindly guide me on this issue.

Regards,

Peter.

Re: i.MAX6Q Debugging using Segger J-Link JTAG

igorpadykov — Mon, 02 Apr 2018 23:41:49 GMT

Hi Peter

please look at "missing the J-Link path" description in "Troubleshooting" section of
The J-Link debugging Eclipse plug-in

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックRe: i.MAX6Q Debugging using Segger J-Link JTAG

i.MAX6Q Debugging using Segger J-Link JTAG

Re: i.MAX6Q Debugging using Segger J-Link JTAG