i.MX Processors中的主题 Re: barebox initramfs config for imxul

barebox initramfs config for imxul

mihaitaivascu — Wed, 16 May 2018 07:48:17 GMT

Hello,

I work with a phytec imx6ul platform with barebox bootloader. I would like to configure at boot time a ram partition to boot from it.

I have spend one day yesterday reading different opinions on the internet and unfortunately it is not clear to me what is needed both on kernel config as on barebox config

Is it enough to add a new entry in the env in barebox: env/boot/initrd and there specify the variables(path, cmd) ?

Or I should put the kernel and fs in the archive and point to it in the kernel config(initramfs source path ...)

If anybody has experience with it and could give me a link where to read the correct procedure or some hints would be appreciated.

Thanks,

Mihaita

Re: barebox initramfs config for imxul

b36401 — Wed, 16 May 2018 10:45:58 GMT

Are you using UDOO board?
We can offer you to use u-boot loader instead of barebox:
https://community.nxp.com/docs/DOC-328200

Have a great day,
Victor

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: barebox initramfs config for imxul

mihaitaivascu — Wed, 16 May 2018 12:05:55 GMT

Hi,

No, I am using phytec board and wish to stick to barebox bootloader on it

Best regards,

Mihaita

Re: barebox initramfs config for imxul

mihaitaivascu — Thu, 17 May 2018 13:30:05 GMT

Could somebody still help me with some info?

Thanks,

Mihaita

Re: barebox initramfs config for imxul

mihaitaivascu — Thu, 24 May 2018 06:49:20 GMT

Hi, I still have this issue. I have not solved it.

Re: barebox initramfs config for imxul

b36401 — Wed, 13 Feb 2019 01:46:23 GMT

Please look at their site for the downloads:

https://www.phytec.eu/products/nxp/imx-6ulull/

Re: barebox initramfs config for imxul

SGDev — Mon, 19 Feb 2024 03:56:45 GMT

Hi

Whether you got any solution for your query regarding the initRAMFS boot for iMX6UL?

Best Regards
SHAILESH