topic Manufacturing tool for iMX in i.MX Processors

Manufacturing tool for iMX

mathew_k_t — Tue, 23 Jan 2018 09:59:56 GMT

Hi,

I wanna flash my emmc using manufacturing tool. But i found following difficulties in the manufacturing tool

The downloaded file contains two directories with rootfs and without rootfs. Which I have to choose?
How to install manufacturing tool, whether it requires any drivers?
How to program emmc using Mfg tool?

Thanks

Re: Manufacturing tool for iMX

diegoadrian — Wed, 24 Jan 2018 00:44:12 GMT

Hello

The difference in the Manufacturing tool with rootfs and without rootfs, I explained you in your other community question.

Manufacturing tool for iMX

Manufacturing tool doesn't need to be installed, is an executable file. You only need to run the script, but take note that you need to have the image in the correct folder. Otherwise, the script won't work.

To program the emmc, you only need to run the correct script that allows you to program the emmc.

Best Regards,

Diego.

Re: Manufacturing tool for iMX

mathew_k_t — Sat, 27 Jan 2018 06:28:40 GMT

Thanks Diego,

What will be the boot setting(SW601,SW602) for iMX6ULL evk while

implementing manufacturing tool

On Wed, Jan 24, 2018 at 6:15 AM, diegoadrian <admin@community.nxp.com>

Re: Manufacturing tool for iMX

mathew_k_t — Mon, 29 Jan 2018 13:41:55 GMT

Hi,

My mfg tool giving following error

can't find PMIC:PFUZE100

how to solve this.?

Also the default images in the mfgtool seems different from the images that I created(difference in name).