i.MX ProcessorsのトピックRe: can imx6D support raw data from MIPI-MAX9286 sensor?

can imx6D support raw data from MIPI-MAX9286 sensor?

翔李 — Tue, 27 Mar 2018 10:06:02 GMT

Now I debug a board on imx6D by mipi connect to max9286 which connect 4 camera,and each camera base on max96705+AR0135 raw data 12bit output.Can the imx6D support the raw data? If it can,please tell me how to do?

Thanks.

Re: can imx6D support raw data from MIPI-MAX9286 sensor?

igorpadykov — Tue, 27 Mar 2018 10:25:50 GMT

Hi 翔李

please check max9286 patches on

iMX6DQ MAX9286 MIPI CSI2 720P camera surround view solution for Linux BSP

general considerations for support the raw data

https://community.nxp.com/thread/320618

IPU - bayer pattern conversion

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: can imx6D support raw data from MIPI-MAX9286 sensor?

翔李 — Wed, 28 Mar 2018 03:11:42 GMT

Thanks.

Did anyone debug sucessfully on max9286-imx6 by raw 12bit data?

My IMX6D HDMI port outputs Four split screen as following pitcure,but the right way must display two split screen because I fill the display area with raw 12bit while display hdmi with YUV 422.Why it outputs four split screen?

Re: can imx6D support raw data from MIPI-MAX9286 sensor?

igorpadykov — Wed, 28 Mar 2018 06:46:53 GMT

Hi 翔李

seems these patches do not support raw format data, so image sizes:

please check img_width * img_height in mxc_v4l2_tvin_max9286 sources

- should be appropriately defined for raw data.

Best regards
igor