iMX6 Board Remote Access Issue

hajimohammed — Thu, 21 Dec 2017 15:02:58 GMT

Hi,

I am using imx6ul platform, below are the configuration using in my board

Linux Kernel - 3.14.38 kernel

Filesystem - Yocto (1.8, Image -core-image-minimal)

I wanted to use my board through putty(remotely), so i installed openssh along with yocto and copied the (binaries, libraries) to my board. I'm able to access my Linux-PC from imx6ul board through WiFi, but i'm not able to access imx6ul board from my linux-PC.

Please suggest!

Thanks In Advance,

Regards,

Haji

Re: iMX6 Board Remote Access Issue

Yuri — Fri, 22 Dec 2017 07:52:15 GMT

Hello,

You need to have ssh server installed and unning on i.MX board to be able to access the board from PC.

So you need to install some ssh server (for example openssh-server).And then you need to make sure that

it is turned on as service with the command like "/etc/init.d/ssh status".

Please follow recommendation in case number 00145319

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: iMX6 Board Remote Access Issue in i.MX Processors

iMX6 Board Remote Access Issue

Re: iMX6 Board Remote Access Issue