CAN 0 node is not appeared when we build flexcan driver along with kernel

santhoshkarthik — Tue, 17 Apr 2018 06:17:11 GMT

Hi,

CAN 0 node is not appeared(in ifconfig -a) when we built along with kernel and I could not do following commands

$echo 125000 > /sys/devices/platform/FlexCAN.0/bitrate

$ip link set can0 up

But if we build FlexCAN as a module, It works and I appiled following patch as well

Please help me to resolve this issue.

Thanks,

Karthik

i.MX ProcessorsのトピックCAN 0 node is not appeared when we build flexcan driver along with kernel