i.MX Processorsのトピックimx6D reboot.c issue?

imx6D reboot.c issue?

jiujinhong — Wed, 20 Dec 2017 09:11:33 GMT

Hi,

Currently i am debuging this issueimx6d wdog1 reboot not stable , but still can't fix this issue even if with the help from community.

So, I want to choose another way to implement reboot for my board, such as SNVS way (PMIC). both do_switch_normal in reboot.c and below func didn't make any sense to reboot, power consumption has no change.

So, i have missed other things for this? thanks.

   void do_power_off(void)
   14 {
   13     u32 reg;
   12     void *addr;
   11     phys_addr_t snvs_base_addr;
   10     phys_addr_t snvs_lpcr;
    9     size_t snvs_size;
    8     if (cpu_is_imx6()) {
    7         pr_warn("cpu is mx6\n");
    6         snvs_base_addr = MX6_SNVS_BASE_ADDR;
    5         snvs_size = MX6_SNVS_SIZE;
    4         snvs_lpcr = MX6_SNVS_LPCR;
    3     } else {
    2         snvs_base_addr = MX7_SNVS_BASE_ADDR;
    1         snvs_size = MX7_SNVS_SIZE;
79          snvs_lpcr = MX7_SNVS_LPCR;
    1     }
   11
   10     addr = ioremap(snvs_base_addr, snvs_size);
    9     if (!addr) {
    8         pr_warn("SNVS ioremap failed!\n");
    7         return;
    6     }
    5     reg = __raw_readl(addr + snvs_lpcr);
    4     reg |= 0x60;
    3     pr_warn("PMIC Config...\n");
    2     __raw_writel(reg, (addr + snvs_lpcr));
    1     iounmap(addr);
92 }

[   12.428086] sysrq: SysRq : Emergency Remount R/O
[   12.435704] EXT4-fs (mmcblk3p6): re-mounted. Opts: (null)
[   12.448787] EXT4-fs (mmcblk3p4): re-mounted. Opts: (null)
[   12.467832] Emergency Remount complete
[   13.066736] imx2-wdt 20bc000.wdog: Device shutdown: Expect reboot!
[   13.073044] reboot: Restarting system with command ''
[   13.087046] cpu is mx6
[   13.089432] PMIC Config...
[   14.092149] Reboot failed -- System halted

Re: imx6D reboot.c issue?

igorpadykov — Wed, 20 Dec 2017 10:47:58 GMT

Hi jiu

reliable reboot can be implemented only removing power (voltage source)

to all components on the board, as it is done on i.MX6Q Sabre SD spf-27392

schematic p.21 (WDOG_B,PWRON, U507 components).

In general one can try other options as described on

Q&A: How is mx6 PMIC_ON_REQ under SW control?

or rtcwakeup in imx-test
www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-test-5.7.tar.gz

If board hangs may be recommended to check VDD_ARM_IN, VDD_SOC_IN voltages

they should be configured for 792 MHz for reliable reboot. Linux cpufreq/busfreq

drivers may lower these voltages to values, not suitable for reboot.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: imx6D reboot.c issue?

jiujinhong — Thu, 21 Dec 2017 01:10:17 GMT

Hi Igor,

I have test 1256-ENGR00178629-i.MX6-sabresd-support-software-power-of.patch.txt.zip patch, can't make system reboot.
I have test "echo performance > scanling_govexx" before rebooting, still hangs in U-boot someplace.
I have fixed cpufreq in dts, still hangs in U-boot someplace.

Re: imx6D reboot.c issue?

igorpadykov — Thu, 21 Dec 2017 02:10:04 GMT

Hi jiu

please make board modifications as is done on i.MX6Q Sabre SD spf-27392

schematic p.21 (WDOG_B,PWRON, U507 components).

Best regards
igor

Re: imx6D reboot.c issue?

jiujinhong — Mon, 25 Dec 2017 02:13:15 GMT

wdog1 reboot issue is fixed by kernel dts.