i.MX ProcessorsのトピックRe: Good news! Mfgtool source code is released now

Good news! Mfgtool source code is released now

StanleyLee — Tue, 17 Jan 2012 07:36:16 GMT

Hi there,

Mfgtool host tool is uploaded to the forum now. You can revise the tool to add your own functionality, and do debug work by yourself if you meet issues.

The tool need below environment to compile:

1. VS2008

2. Windows XP/7 SDK

3. Windows XP/7 WDK

For details, please refer to Build_Requirements.docx in mfgtools\Apps\MfgTool.exe\docs

And any feedback about the tool is appreciated!

Re: Good news! Mfgtool source code is released now

ChrisWilliamson — Tue, 17 Jan 2012 15:01:16 GMT

AWESOME! Way to go everyone!

Chris

Re: Good news! Mfgtool source code is released now

vishnupatekar — Tue, 17 Jan 2012 15:54:07 GMT

Great!! Thanks for sharing source code.

Re: Good news! Mfgtool source code is released now

x10 — Wed, 18 Jan 2012 01:43:46 GMT

Thanks for sharing source code

Re: Good news! Mfgtool source code is released now

MarcCoussement — Thu, 10 May 2012 20:37:02 GMT

Sorry,

Can't find latest mfgtool source code dowload link.

Marc,

Re: Good news! Mfgtool source code is released now

ChrisWilliamson — Thu, 10 May 2012 20:56:58 GMT

Here you go.

Chris

http://imxcommunity.org/group/manufacturing-tool-mfgtool

Marc coussement said:

Sorry,
Can't find latest mfgtool source code dowload link.

Marc,

Re: Good news! Mfgtool source code is released now

MarcCoussement — Thu, 10 May 2012 22:15:14 GMT

Thanks Chris

Marc,

Re: Good news! Mfgtool source code is released now

yekta — Mon, 28 May 2012 10:46:08 GMT

Hi Stanley,

1) I have read your Mfgtool Roadmap presentation .You are mentioning about three methods .

One of them is Mfgtool-SD. Which may be the solution for me.

My case :

I 'didnt connect the USB bus of the i.mx53 .The USB port on my board is actually a serial port of the i.mx53 which are connected to eachother over an USB-RS232 converter chip.

I want to install the uboot.bin etc into the brandnew SDcard and boot from SDcard .

May I use your tool for this purpose ? Is the link below the latest version including MfgTool-SD ?

http://imxcommunity.org/group/manufacturing-tool-mfgtool

2) May I create the bootable SD-card on my LTIB devolopment PC ( by creating partitions and copying uboot.bin to SDcard) and insert into the custom HW SDcard slot - without using the Mfg Tool?

Re: Good news! Mfgtool source code is released now

EdSutter — Tue, 24 Jul 2012 19:51:54 GMT

Couple of questions:

1. Has anyone downloaded and built this? I just downloaded the source and tried to build it using VS2008, and apparently a few files (usbiodef.h, hidsdi.h, scsi.h) are missing. Is the .zip file up to date or did I just not read something?

2.Does this tool take a .elf image as input and create the "Program Image" (as discussed in section 7.6 of the imx53RM?

tx in advance,

Re: Good news! Mfgtool source code is released now

ChrisWilliamson — Tue, 24 Jul 2012 20:54:27 GMT

Hi Ed,

1. Those files are part of the Microsoft Windows Driver Kit (WDK). I think there is a Build_Requirements.docx in mfgtools\Apps\MfgTool.exe\docs that should explain how to setup inlcude paths after you install the WDK.

2. The tool doesn't create different firmware images. It just processes script instructions in the ucl.xml file. Typically the commands are some type of (Linux/WinCE) commands to partition the boot media and then copy down the various firmware files to the appropriate places on the newly partitioned media.

Best regards,

Chris

Re: Good news! Mfgtool source code is released now

EdSutter — Tue, 24 Jul 2012 21:03:17 GMT

Chris,

Ok, thanks I'll look into that; however, I'm beginning to wonder if what I want to do is legit...

I wanna build a bootmonitor image (say bootmonitor.elf), convert it to the "program image" format (section 7.6 of RM) and just take a QSB, put it in "boot from UART" mode, then use the serial download protocol (discussed in 7.8.3 of iMX53RM.pdf) to download that image using the WriteFile and Completed commands.

Should I be able to do this to boot a "raw" (no SD card installed) QSB from scratch?

Re: Good news! Mfgtool source code is released now

ChrisWilliamson — Tue, 24 Jul 2012 21:13:37 GMT

Hi Ed,

I'm sorry, but that question is outside of my expertise. My experience is really with the Windows application. Hopefully someone with more knowledge of the i.MX53 QSB can help.

Best regards,

Chris

Re: Good news! Mfgtool source code is released now

PaulZander — Thu, 27 Sep 2012 09:24:36 GMT

It seems that the link to the MFGtool is not working anymore.

Do you know where I can get the tool?

Re: Good news! Mfgtool source code is released now

GregDyess — Tue, 27 Nov 2012 18:48:41 GMT

Has there been any update concerning the source code download link? It appears to be broken.

Re: Good news! Mfgtool source code is released now

pederalm — Thu, 02 May 2013 12:11:09 GMT

Link is broken. Any new address?

Re: Good news! Mfgtool source code is released now

GregDyess — Thu, 02 May 2013 16:37:50 GMT

Please supply an updated link. The links provided in this thread are dead-ends. Searches in the forum just turn up discussions relating to problems or use cases for MfgTool, but not the source.

Thanks

Re: Good news! Mfgtool source code is released now

behlingc — Wed, 21 Aug 2013 13:48:31 GMT

Hi Xingyu Li,

the download link is still broken as Gregory and Paul already reported.

I would be glad too, if you could provide us a new link for the sources.

Best regards

Carsten

Re: Good news! Mfgtool source code is released now

StanleyLee — Thu, 22 Aug 2013 01:44:17 GMT

Hi Carsten,

Thanks for your reminding. I transferred to FAE team almost two years ago. Lu lin is responsible for Mfgtool development now.

Hi Lin,

Could you help maintain this topic(i.e. provide source code for both Mfgtool 1.x and Mfgtool 2.x)? Thanks.

Best Regards,

Starle Li /李星宇

Freescale GSM i.MX China Support

Tel: 8621-28937059

Fax: 8621-28937040

E-mail: Xingyu.Li@freescale.com<mailto:Xingyu.Li@freescale.com>

Re: Good news! Mfgtool source code is released now

AndrewLu — Thu, 22 Aug 2013 02:12:07 GMT

Hi Carsten

The code is already available on the external web page.

Here under the Programmer section they can the source code for the 2.0 version.

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6D&nodeId=018rH3ZrDRB24A&fpsp=1&tab=Design_Tools_Tab

Here also under the Programmer section they can the source code for the 1.0 version.

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX534&nodeId=018rH3ZrDR988D&fpsp=1&tab=Design_Tools_Tab

Re: Good news! Mfgtool source code is released now

simocn77 — Wed, 25 Nov 2015 09:40:44 GMT

Hi,

is there any git repository ?

thanks ,

Simone Cianni