i.MX ProcessorsのトピックRe: Cortex A7 & M4 communication

Cortex A7 & M4 communication

suryapradhan — Mon, 18 Dec 2017 13:58:17 GMT

I am using IMX7D & trying to communicate between cortex -A7 & M4.

Currently i am able to communicate between the processors using RPMSG.

But we have to load the firmware/application to M4 in bootloader prompt using fatload, bootaux commands.

Is there any way we can reset & load the firmware from linux kernel.

Thanks

Surya

gary_bisson — Mon, 18 Dec 2017 16:28:27 GMT

Hi,

I suggest you have a look at this tool from NXP:

Regards,

Gary

suryapradhan — Tue, 09 Jan 2018 11:17:21 GMT

HI Gary Bisson,

Thanks for the reply.

I am using "m4fwloader" tool to load,start & stop the firmware to Cortex-M4 from linux- cortex A7.

But i got one issue here, while stopping the firmware & starting again.

Scenario:

I am using "rpmsg_str_echo_freertos_example.bin" firmware & able to communicate with M4 properly.

Next i stopped it & started it again using "m4fwloader stop" & "m4fwloader start" command.

Now if i do "echo hi > /dev/ttyRPMSG", i am getting all my previous messages[message from last communication] along with new message.

Any suggestion on this.

Regards

Surya