i.MX ProcessorsのトピックRead Unique ID on i.MX7

Read Unique ID on i.MX7

adriansapio — Fri, 15 Dec 2017 21:55:12 GMT

Has anyone been able to read the 64-bit Unique ID of the i.MX7 from Linux?

I see the fusemap documentation in the i.MX7 Reference Manual. It's not clear to me what to do with that or how to access those registers.

In my linux distro:

1) There is no serial number in /cat/cpuinfo:

# cat /proc/cpuinfo | grep Serial
Serial : 0000000000000000

2) I see some HW_OCOTP files in /sys/fsl_otp, but its not clear what to do with them.

Can anyone provide guidance or info on this?

If I could read the Unique ID in uboot, that would be a good start also, but I just generally don't see any documentation anywhere at all as to how to do this.

Thanks!

Re: Read Unique ID on i.MX7

marius_grigoras — Mon, 18 Dec 2017 14:46:15 GMT

Hi,

Accordingly with the fuse map for iMX7D, the UNIQUE_ID (64bits) is covered by bank 0, word 1 and word 2.

Accordingly with the SoC Reference Manual, the OCOTPs for these are OCOTP_TESTER0 and OCOTP_TESTER1.

Using echo and cat commands can write/read to these.

Regards,

Marius

Re: Read Unique ID on i.MX7

adriansapio — Fri, 29 Dec 2017 12:22:09 GMT

Hello Marius,

Thanks for your reply. I have tested this and it does appear correct. On three separate processors:

Processor #1:

cat /sys/fsl_otp/HW_OCOTP_TESTER0

0xac98b953

cat /sys/fsl_otp/HW_OCOTP_TESTER1

0x67

Processor #2:

cat /sys/fsl_otp/HW_OCOTP_TESTER0

0xc98b953

cat /sys/fsl_otp/HW_OCOTP_TESTER1

0x2d7

Processor #3:

cat /sys/fsl_otp/HW_OCOTP_TESTER0

0x4c98b953

cat /sys/fsl_otp/HW_OCOTP_TESTER1

0x97

So, I am interpreting these cat responses to imply the following:

Processor #1: 64-bit Unique ID = 0x00000067AC98B953

Processor #2: 64-bit Unique ID = 0x000002D70C98B953

Processor #3: 64-bit Unique ID = 0x000000974C98B953

Let me know if any of this looks incorrect or any assumptions are off.

Thanks