topic Re: I.Mx8 camera raw sensor in i.MX Processors

I.Mx8 camera raw sensor

jhongting — Fri, 04 May 2018 11:00:43 GMT

Hello ,

I want to porting imx219 camera sensor to imx8-evk board.

1) Does the evk board support raw sensor for camera module?

if support raw sensor module , how to configure the evk board? because I need setup Raw10 data format(SRGGB10)

SW: imx8 beta version

ioctl flow = mx6s_capture.c -> mxc_mipi_csi2_yav.c -> sensor driver

HW:imx8 evk board

Thanks.

Bio_TICFSL — Mon, 07 May 2018 13:59:52 GMT

Hi ben,

You are talking about i.Mx6 in you sw please check sect.40.5.14 RAW10 Data Reception i.MX6DQ Reference Manual

for the i.mx8 you will have to use v4l2

jhongting — Mon, 07 May 2018 16:43:34 GMT

Hello Bio,

I know SW support Raw10 format in the doc. But I have a question.

How to configure the evk board for raw10 format? has any patch?