topic Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0 in i.MX Processors

Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Fri, 01 Sep 2017 10:26:29 GMT

Hi,

I have tried to build the image of android imx6qsabresd. The image was build successful and I have followed as per instruction given in Android user guide pdf but the thing is when I flash the image in SD CARD and put into sabresd Development board but I was getting error continuously

binder: 196:196 transaction failed 29189, size 0-0
binder: 196:196 transaction failed 29189, size 0-0
binder: 196:196 transaction failed 29189, size 0-0
binder: 196:196 transaction failed 29189, size 0-0
binder: 196:196 transaction failed 29189, size 0-0

I have also tried with Pre-built image but I was getting same error.

May I know why this error was getting. Hope am waiting for your kind reply.

Thanks & Regards,

R Lakshmikanth

Original Attachment has been moved to: binder-log-error.txt.zip

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

vanessa_maegima — Fri, 01 Sep 2017 13:11:50 GMT

Hi Lakshmikanth,

Please try this: Avoiding binder issue on android pre-built image - i.MXDev Blog

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Mon, 04 Sep 2017 03:58:29 GMT

Hi,

Thank you for response. I have already tried this Avoiding binder issue on android pre-built image - i.MXDev Blog

but it was not solved the problem. Do you have any idea regrading this one. Hope am awaiting for response.

Thanks & Regards,

R. Lakshmikanth

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

JayTu — Mon, 04 Sep 2017 04:15:33 GMT

From your log, you are trying to mount emmc instead of SD card.

Then android can't find necessary command to boot up,

init: error opening block device /dev/block/mmcblk3p2: No such file or directory
init: cannot find '/system/bin/logd', disabling 'logd'
init: cannot find '/system/bin/vold', disabling 'vold'
init: cannot find '/system/bin/tzdatacheck', disabling 'exec 0 (/system/bin/tzdatacheck)'
init: cannot find '/system/bin/logd', disabling 'logd'
init: cannot find '/system/bin/logd', disabling 'logd-reinit'‍‍‍‍‍‍

Make sure you are building bootimage for sd as below,

make bootimage BUILD_TARGET_DEVICE=sd‍

You can also check vold.fstab to see if it mounts emmc or SD.

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Mon, 04 Sep 2017 11:42:48 GMT

Hi,

Thank you for kind reply.

I have tried as per instruction , make bootimage BUILD_TARGET_DEVICE=sd but I was getting same binder error failed.

Please check the attachment of log file and capture image

As per above instruction I have done but I was got same binder failed error. Do you have any idea regrading this.

Hope am waiting for reply.

Thanks & Regards,

Lakshmikanth R

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

JayTu — Mon, 04 Sep 2017 13:51:23 GMT

I can see it mounts some partitions successfully as below, but I still can't see system partition is mounted.

EXT4-fs (mmcblk2p4): Ignoring removed nomblk_io_submit option
EXT4-fs (mmcblk2p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic
fs_mgr: __mount(source=/dev/block/mmcblk2p4,target=/data,type=ext4)=0
EXT4-fs (mmcblk2p6): Ignoring removed nomblk_io_submit option
EXT4-fs (mmcblk2p6): mounted filesystem with ordered data mode. Opts: nomblk_io_submit
fs_mgr: __mount(source=/dev/block/mmcblk2p6,target=/cache,type=ext4)=0
EXT4-fs (mmcblk2p7): mounted filesystem with ordered data mode. Opts: (null)
fs_mgr: __mount(source=/dev/block/mmcblk2p7,target=/device,type=ext4)=0‍‍‍‍‍‍‍‍

You can try if you can access system partition of SD card on PC.

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

JayTu — Mon, 04 Sep 2017 14:06:04 GMT

And can you also attach your fstab.freescale? It's called root directory under the built out directory.

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Tue, 05 Sep 2017 03:38:44 GMT

Hi,

Thank you for response.

Please find the attachment of files. Actually one thing I have observed while flashing the all images , I just check out file are contain in the SD card while opening the sd card , I didn't observe the boot and recovery is unable to mount the device where as cache , vendor,system and data is mounted properly . May be due to this reason it was unable to do the process the things properly. Hope am looking forward for your reply.

Thanks & Regards,

R, Lakshmikanth

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Wed, 06 Sep 2017 06:14:55 GMT

I have created partition as per instruction given in Android_user_guide.pdf

where I have attached the sd card partition and flashing the image but I was getting same error binder: 206:206 transaction failed 29189, size 0-0.

Please find the attachments file.

Hope am looking forward for reply.

Thanks & Regards,

R Lakshmikanth

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

diegoadrian — Wed, 06 Sep 2017 22:46:24 GMT

Hello Lakshmikanth

If you want a quick answer for your problem. You can set the bellow bootargs in the u-boot terminal. Those bootargs, normally solve the binder problem.

U-Boot > setenv bootcmd boota mmc2
U-Boot > setenv bootargs console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32
video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=128M androidboot.console=ttymxc0
consoleblank=0 androidboot.hardware=freescale cma=448M androidboot.selinux=permissive
androidboot.dm_verity=disable
U-Boot > saveenv

I hope this can solve your problem.

Best regards,

Diego.

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Fri, 08 Sep 2017 05:47:35 GMT

Hi,

Thank you for response.

I have tried as per your instruction but default bootcmd is fetch from mmc1 but if i modified , it is unable to load the boot and kernel files. It's fails to execute the process.

Hope do u have any idea regrading this.Hope am looking forward for reply.

Thanks & Regards,

R lakshmikanth

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Mon, 11 Sep 2017 10:35:25 GMT

Hi,

After modifying the the following bootargs , the binder problem was solved .

U-Boot 2016.03 (Sep 11 2017 - 14:51:40 +0530)

CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 26C
Reset cause: POR
Board: MX6-SabreSD
I2C:   ready
DRAM: 1 GiB
PMIC: PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In:    serial
Out:   serial
Err:   serial
check_and_clean: reg 0, flag_set 0
Fastboot: Normal
flash target is MMC:1
Net:   FEC [PRIME]
Hit any key to stop autoboot: 3     2     0
=> setenv bootargs console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb1:off video=mxcfb2:off vido=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M androidboot.selinux=disabled androidboot.dm_verity=disabled
=> saveenv

=> reset

Actually , the kernel system is unable to mount the console path. if you modify the above highlighted command in u-boot , the problem binder issue was solved.

Thanks & regards,

R Lakshmikanth

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Mon, 11 Sep 2017 10:43:32 GMT

Hi,

I have also modify the u-boot 2015 to u-boot 2016 and change the bootargs then binder android issue problem was solved.

Thanks & Regards,

R lakshmikanth

Re: Android Imx6 Issue - binder: 196:196 transaction failed 29189, size 0-0

lakshmikanthr — Mon, 11 Sep 2017 11:37:30 GMT

Hi,

There is no problem of u-boot 2015 or u-boot 2016 .Just modify the bootargs , the android binder issue problem was solved.

Thanks & Regards,

R Lakshmikanth