TJA1100 Rx and Tx Failure Count

shanmugamsundar — Tue, 19 Sep 2017 06:26:21 GMT

Hi,

We are using TJA1100 for our automotive applications. We have requirement to send out the PHY Rx and Tx failure count.

In Datasheet I can find the register address 26 (Link fail counter register).Which is counting Local receiver error count and Remote receiver error count.

We cannot understand completely the Local and remote receiver error counts. And How it related with Tx and Rx failure counts.

For example:

Can we assume like below

Local receiver count = Tx failure

Remote receiver count = Rx Failure

Can someone clarify the above doubts.

Thanks,

Shan

Re: TJA1100 Rx and Tx Failure Count

Rita_Wang — Tue, 19 Sep 2017 06:59:28 GMT

You can refer to

TJA1100 pin4&16 ; C26 & C28

TJA1100 in imx6 with Managed mode

https://community.nxp.com/message/925234

Hope these can do help for you.

Have a nice day

Rita

i.MX ProcessorsのトピックTJA1100 Rx and Tx Failure Count

TJA1100 Rx and Tx Failure Count

Re: TJA1100 Rx and Tx Failure Count