topic Re: How To Reduce The Boot Time. in i.MX Processors

How To Reduce The Boot Time.

nandishguruling — Mon, 18 Sep 2017 13:09:34 GMT

Hi All ,

please any one can have look about this issue till now its not solved https://community.nxp.com/thread/459641 your help is needed,

Thanks in advance.

Best Regards.

Nandish SG

Re: How To Reduce The Boot Time.

gusarambula — Mon, 18 Sep 2017 17:02:18 GMT

Hello Nandish SG,

There is limited information regarding improving booting time as it does depend a lot on your particular implementation.

On the later part of the original thread community user Jeremy Sherrill recommended NitroBoot, which is a form of hibernation that allows the system too boot much faster. You can find more information regarding NitroBoot on the following link:

https://www.datalight.com/products/fast-boot-linux/

I hope this information helps!

Regards,

Re: How To Reduce The Boot Time.

fabio_estevam — Mon, 18 Sep 2017 18:32:53 GMT

You can use this tutorial based on imx6q sabresd:

https://imxdev.gitlab.io/tutorial/How_to_decrease_boot_time_on_iMX6/

https://imxdev.gitlab.io/video/tutorial/Booting-iMX6-under-one-second/

Re: How To Reduce The Boot Time.

nandishguruling — Tue, 19 Sep 2017 04:53:42 GMT

Hello Fabio,

Thanks for your quick reply, But in the above link information is insufficient for me, in my previous post i asked this question, should i change the image or what ?, my board is imx6dl sabreauto and image is fsl-image-qt5, But in Falcon mode how to do information is not clear to me, if you know how to do please share it here,

Best Regards,

Nandish SG

Re: How To Reduce The Boot Time.

nandishguruling — Tue, 19 Sep 2017 05:59:36 GMT

Hello Gusarambula,

Thanks for your quick reply, i want to just reduce the boot time and i want to see the display very soon within a few seconds, my image is "fsl-image-qt5" and board is imx6dl sabreauto, i tried all these inks

https://imxdev.gitlab.io/tutorial/How_to_decrease_boot_time_on_iMX6/

https://imxdev.gitlab.io/video/tutorial/Booting-iMX6-under-one-second/ but info is not clear to me. if you know how to do please share it here. Thanks in advance,

Best Regards,

Nandish SG