How to enable GPU and check GPU utilization on i.MX6Q?

ponguru_s — Fri, 18 Aug 2017 09:25:49 GMT

I'm using i.MX6q board with Yocto 4.1.15-2.0.0. I want to enable GPU acceleration on the board. Also, I want test the GPU utilization just like 'free' command to check RAM utilization.

I need some examples to compare the graphics.

Igor1z‌

Re: How to enable GPU and check GPU utilization on i.MX6Q?

igorpadykov — Mon, 21 Aug 2017 23:22:08 GMT

Hi Surendranath

please use nxp bsps on below link

http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx-6series-i.mx-7series-software-and-development-tool-resources:IMX_SW

and enable gpu driver described in Linux Manual included in Doc package:

http://www.nxp.com/webapp/Download?colCode=L4.1.15_2.1.0_LINUX_DOCS&Parent_nodeId=1337699481071706174845&Parent_pageType…

also one can use

IDE - Debug, Compile and Build Tools (15)
i.MX6D/Q/DL/S/SX GPU Tools
http://www.nxp.com/products/microcontrollers-and-processors/arm-based-portfolio/i.mx-applications-processors/i.mx-6-processors/i.mx-6quad-processors-high-performance-3d-graphics-hd-video-arm-cortex-a9-core:i.MX6Q?tab=Design_Tools_Tab

utilization can be checked with top command.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: How to enable GPU and check GPU utilization on i.MX6Q?

ponguru_s — Tue, 22 Aug 2017 04:36:56 GMT

Thank you for the reply.

i.MX ProcessorsのトピックRe: How to enable GPU and check GPU utilization on i.MX6Q?

How to enable GPU and check GPU utilization on i.MX6Q?

Re: How to enable GPU and check GPU utilization on i.MX6Q?

Re: How to enable GPU and check GPU utilization on i.MX6Q?