topic mx6ul can not insmod usb gadget device in i.MX Processors

mx6ul can not insmod usb gadget device

linhaiboyy — Tue, 15 Aug 2017 06:56:17 GMT

Hi,

I am working on mx6ul,and used kernel 3.14.38. In the kernel, I am execute command : make modules ,can get the file,which is configfs.ko, libcomposite.ko and g_zero.ko. Can insmod configfs.ko ,and libcomposite.ko, but I am insmod g_zero.ko. the kernel tell me insmod: can't insert 'g_zero.ko': No such device

Best regards

HAIBO LIN

Re: mx6ul can not insmod usb gadget device

igorpadykov — Tue, 15 Aug 2017 09:37:05 GMT

Hi HAIBO

does file exist on that path. Had you tried modprobe :

linux - What's the difference between insmod and modprobe? - Stack Overflow

Also may be useful to try latest kernels on

http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx-6series-i.mx-7series-software-and-development-tool-resources:IMX_SW

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: mx6ul can not insmod usb gadget device

linhaiboyy — Thu, 17 Aug 2017 03:08:32 GMT

Hi,

I had loaddown the linux kernel 4.1.15, can compile through the kernel. But the kernel can not run. I use emmc start, how can i config in the kernel???