topic does L3.0.35 support imxdp in i.MX Processors

does L3.0.35 support imxdp

yufe — Mon, 14 Aug 2017 01:58:35 GMT

my custom board use imxdp as core, can L3.0.35 bsp support?

i didn't find chip type for imx6dp, even in higher kernel version. which config option for imx6dp, imxd or imxq?

Re: does L3.0.35 support imxdp

igorpadykov — Mon, 14 Aug 2017 02:19:32 GMT

Hi yu

unfortunately L3.0.35 bsp does not support i.MX6DQP processors.

It is supported in yocto releases found on

http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx-6series-i.mx-7series-software-and-development-tool-resources:IMX_SW

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: does L3.0.35 support imxdp

yufe — Mon, 14 Aug 2017 02:40:48 GMT

i choose yocto L3.14.52, reference board is "sabresd", but i can't find chip type imx6dp, only imx6d, 6q. can i choose 6d or 6q instead?

Re: does L3.0.35 support imxdp

igorpadykov — Mon, 14 Aug 2017 04:29:17 GMT

please choose "imx6qpsabresd" configuration using sect.5.1 Build configurations

attached Yocto Guide. "imx6d, 6q" configuration can not be used for i.MX6QP.

Best regards
igor