MX53 OTG device mode issue

SamChen — Tue, 03 Jan 2012 04:46:16 GMT

Dear all

I encounted a problem with MX53 usb device mode.

I set the MX53 to bulk only devce with my self firmware code,

and I initial enpoint 1 to "Bulk IN" and enpoint 2 to "Bulk OUT".

I had got the "set configuration 1" command from endpoint 0.

But I don't know how to get OUT command from endpoint 2, like to get "setup command" from endpoint 0,

Then I don't know when to prime the data from Host? There is no any NAK and Complete status from endpoint 1 & 2.

Thanks for your help!

Sam

Re: MX53 OTG device mode issue

SamChen — Wed, 11 Apr 2012 10:23:47 GMT

New datasheet correct the Register Address.

Thanks!