topic Re: Cross compiling toolchain for QT 5.9? in i.MX Processors

Cross compiling toolchain for QT 5.9?

maheshkumarkoda — Wed, 14 Jun 2017 23:16:11 GMT

Hello,

I would like to cross compile a QT demo image for Sabreauto using QT5.9.

I checkedout morty using repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b morty

I can see only two bitbake options for toolchain in morty

meta-toolchain
meta-extsdk-toolchain

which is relevant for QT?

Did anyone cross compile QT5.9 using morty's CC version?

Regards,

Mahesh.

Re: Cross compiling toolchain for QT 5.9?

joanxie — Fri, 16 Jun 2017 08:49:14 GMT

current bsp doesnt have qt5.9, if you need to use this, you need to port the qt 5.9 to your board, for detailed information, you need to refer qt documents

Re: Cross compiling toolchain for QT 5.9?

maheshkumarkoda — Fri, 16 Jun 2017 10:08:16 GMT

Hi Joan, Any link to documentation?

Re: Cross compiling toolchain for QT 5.9?

joanxie — Mon, 19 Jun 2017 08:40:09 GMT

I found this document, hope helpful for you

Qt 5.9 for Device Creation

Re: Cross compiling toolchain for QT 5.9?

maheshkumarkoda — Mon, 19 Jun 2017 15:09:14 GMT

Thanks for the pointer Joan, After going through the doc'n and looking at the following yocto build link.

Building Your Own Embedded Linux Image | Qt 5.9 for Device Creation

it is mentioned that yocto layer meta-b2qt can be used, is it same as meta-boot2qt?

Can I get compatible toolchain from morty branch to build qt5.9?