topic IMX6UL ethernet issue in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/IMX6UL-ethernet-issue/m-p/687882#M106548 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>i am using the customized board based on imx6UL using Linux. While i ma booting my board with sdcard then ethernet is working fine on u-boot, i am able to ping b/w board and laptop. But when i am booting my board using imx6 usb loader then ethernet is not working on u-boot.</P><P>In both cases u-boot.imx is same.</P><P></P><P>Below are the logs:-</P><P></P><P><STRONG><EM>board_mmc_init...</EM></STRONG><BR /><STRONG><EM>switch to partitions #0, OK</EM></STRONG><BR /><STRONG><EM>mmc1 is current device</EM></STRONG><BR /><STRONG><EM>Net: Phy 1 not found</EM></STRONG><BR /><STRONG><EM>PHY reset timed out</EM></STRONG><BR /><STRONG><EM>FEC0</EM></STRONG><BR /><STRONG><EM>Boot from USB for mfgtools</EM></STRONG><BR /><STRONG><EM>Use default environment for mfgtools</EM></STRONG><BR /><STRONG><EM>Run bootcmd_mfg: run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};</EM></STRONG><BR /><STRONG><EM>Hit any key to stop autoboot: 0 </EM></STRONG><BR /><STRONG><EM>Bad Linux ARM zImage magic!&nbsp;</EM></STRONG></P><P><STRONG></STRONG></P><P>Thanks-</P><P>Dinesh</P></BODY></HTML> Thu, 15 Jun 2017 10:39:47 GMT dineshsehrawat 2017-06-15T10:39:47Z IMX6UL ethernet issue https://community.nxp.com/t5/i-MX-Processors/IMX6UL-ethernet-issue/m-p/687882#M106548 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>i am using the customized board based on imx6UL using Linux. While i ma booting my board with sdcard then ethernet is working fine on u-boot, i am able to ping b/w board and laptop. But when i am booting my board using imx6 usb loader then ethernet is not working on u-boot.</P><P>In both cases u-boot.imx is same.</P><P></P><P>Below are the logs:-</P><P></P><P><STRONG><EM>board_mmc_init...</EM></STRONG><BR /><STRONG><EM>switch to partitions #0, OK</EM></STRONG><BR /><STRONG><EM>mmc1 is current device</EM></STRONG><BR /><STRONG><EM>Net: Phy 1 not found</EM></STRONG><BR /><STRONG><EM>PHY reset timed out</EM></STRONG><BR /><STRONG><EM>FEC0</EM></STRONG><BR /><STRONG><EM>Boot from USB for mfgtools</EM></STRONG><BR /><STRONG><EM>Use default environment for mfgtools</EM></STRONG><BR /><STRONG><EM>Run bootcmd_mfg: run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};</EM></STRONG><BR /><STRONG><EM>Hit any key to stop autoboot: 0 </EM></STRONG><BR /><STRONG><EM>Bad Linux ARM zImage magic!&nbsp;</EM></STRONG></P><P><STRONG></STRONG></P><P>Thanks-</P><P>Dinesh</P></BODY></HTML> Thu, 15 Jun 2017 10:39:47 GMT https://community.nxp.com/t5/i-MX-Processors/IMX6UL-ethernet-issue/m-p/687882#M106548 dineshsehrawat 2017-06-15T10:39:47Z