How to test the EIM interface on the Target prototype board

adityanagal — Fri, 28 Jul 2017 13:07:39 GMT

Hi ,

I am writing the diagnostics for the IMX6 solo based Target prototype board and I need to test the EIM interface over the target board. I need to implement the test case is the user space application to test the EIM interface. Please

let me know how can I do that. Any reference piece of software will be very helpful. Thanks.

Regards,

Aditya

Re: How to test the EIM interface on the Target prototype board

igorpadykov — Fri, 28 Jul 2017 23:34:58 GMT

Hi Aditya

one can test with sdk on

https://github.com/backenklee/swp-report/tree/master/iMX6_Platform_SDK

please refer to Chapter 7 Configuring the EIM Driver attached pdf file for description.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic How to test the EIM interface on the Target prototype board in i.MX Processors

How to test the EIM interface on the Target prototype board

Re: How to test the EIM interface on the Target prototype board