topic FT5X06 can't work properly in i.MX Processors

FT5X06 can't work properly

pengxingwei — Fri, 28 Jul 2017 03:07:29 GMT

Hi,

My OS is Android_M6.0 and my board is imx6q sabresd,which kernel is linux 4.1.15,I want to point the ft5x06 touchscreen on it,now the driver is https://github.com/boundarydevices/linux-imx6/blob/boundary-imx-m6.0.1_1.0.0-ga/drivers/input/touchscreen/ft5x06_ts.c

my dts file is imx6qdl-sabresd.dtsi,

ft5x06_ts@38 {
	compatible = "ft5x06,ft5x06-touch";
	reg = <0x38>;
	interrupts-extended = <&gpio6 2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <<&gpio6 3 1>
	wakeup-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
	};

now the system startup log :

now the touchscreen has respond ,but the touch point is not accuracy,the effect is as the picture

how to solve the problem .thanks

Re: FT5X06 can't work properly

igorpadykov — Fri, 28 Jul 2017 04:06:07 GMT

Hi peng

please try calibration as described on

How to use tslib calibration at i2c touch ft5x06 in Android 5.0

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: FT5X06 can't work properly

pengxingwei — Fri, 28 Jul 2017 06:38:31 GMT

Hi,thanks for your reply,

for my board the resolution is correct (1280 *800).but when i leave the screen and move to other position ,sometimes the circle didn't move with my finger.the link:

How to use tslib calibration at i2c touch ft5x06 in Android 5.0 it can't solve my problem ,Are there others solution for it ?thanks!

Re: FT5X06 can't work properly

pengxingwei — Fri, 28 Jul 2017 09:26:11 GMT

Hi ,I print the touch point :

Its value is abnormal,why happen to it ?? What matters most is the circle didn't move with my finger. Thanks

Re: FT5X06 can't work properly

igorpadykov — Fri, 28 Jul 2017 11:32:20 GMT

if you correctly calibrated it, its value should not be abnormal.

Re: FT5X06 can't work properly

pengxingwei — Mon, 31 Jul 2017 01:40:52 GMT

Hi,igorpadykov:

I install the calibration app failed，the app can't install on my device.