i.MX ProcessorsのトピックRe: Add con2fbmap to iMX-7S

Add con2fbmap to iMX-7S

chaunguyenngoc — Wed, 07 Jun 2017 06:48:31 GMT

After setup FBTFT Driver (SSD1351) for my WARP7

Now I want to test my framebuffer to display something on screen.

All resources refer to con2fbmap. but it seem to be only existed in RPi.

How can I add con2fbmap to my Yocto image ? (I'm using core-image-base image)

Note: I searched for packages that can be added to yocto here OpenEmbedded Layer Index - meta-fsl-demos

But it do not have fbset package

texierp — Wed, 07 Jun 2017 11:41:26 GMT

You can find fbset into the meta-openembedded layer (meta-openembedded/meta-oe/recipes-support/fbset at master · openembedded/meta-openembedded · GitHub ) (Already in bitbake's configuration (bblayer.conf))

chaunguyenngoc — Wed, 07 Jun 2017 12:18:41 GMT

Sorry for my naive question, but....How can i use it ?

texierp — Wed, 07 Jun 2017 13:48:03 GMT

Have you tried to run : bitbake fbset ?

Otherwise, you can add the following command to local.conf and rebuild your image.

IMAGE_INSTALL_append += " fbset"

gusarambula — Wed, 07 Jun 2017 19:34:32 GMT

Just adding to PJ's answer, you can see if the fbset recipe is available on your bitbake environment by running:

$ bitbake -s | grep fbset

Regards,

chaunguyenngoc — Thu, 08 Jun 2017 01:28:37 GMT

Otherwise, you can add the following command to local.conf and rebuild your image.

IMAGE_INSTALL_append += " fbset"

Thank you for your time, guys. I will take this answer :smileyhappy: