NVCC_RGMII 3.3V for i.MX6Q

ymyu — Thu, 11 May 2017 05:48:28 GMT

Hello,

i.MX6Q and i.MX6QP can support 3.3V NVCC_RGMII? I found similar question at below link but it is for i.MX6SX.

https://community.nxp.com/message/881009

I want to know if it is applicable to i.MX6Q.

If it is ok, I am going to tie NVCC_RGMII to NVCC_ENET which is supplied by ETH_3V3. I am using KSZ9031RNX.

Re: NVCC_RGMII 3.3V for i.MX6Q

igorpadykov — Thu, 11 May 2017 07:22:07 GMT

Hi YM

NVCC_RGMII is defined in Table 6. Operating Ranges i.MX6DQ Datasheet,

it does not support 3.3V

http://cache.freescale.com/files/32bit/doc/data_sheet/IMX6DQCEC.pdf

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックNVCC_RGMII 3.3V for i.MX6Q

NVCC_RGMII 3.3V for i.MX6Q

Re: NVCC_RGMII 3.3V for i.MX6Q