Android User's Guide Rev. N7.1.1_1.0.0, 03/2017

hiroyukihara — Tue, 27 Jun 2017 12:28:32 GMT

6.1.6 Booting from SD on the i.MX 7Dual SABRE-SD board

It is written as follows.

Download mode (MFGTool mode)	SW4: 00100000 (from 1-8 bit) Boot_Mode: 01 (from 1-2 bit)
SD boot	SW4: 00111000 (from 1-8 bit) Boot_Mode: 10 (from 1-2 bit)

To boot from SD, perform the following operations:
Chang the board Boot_Mode switch to 10 (from 1-2 bit) and SW4 00100000 (from 1-8 bit).

I think that SW4: 00111000 (from 1-8 bit) is the correct answer.

Which is the correct answer?

AndroidTM Quick Start Guide　Rev. N7.1.1_1.0.0, 03/2017

It is written as follows P.31

9. Change SW3 (boot mode) to 10 (from 1 bit to 2 bit). Change SW2 to switch the board back to SD4 boot mode
00100000 (SD), 01010000 (eMMC), 011XXXX0 (NAND).

Re: Android User's Guide Rev. N7.1.1_1.0.0, 03/2017

Yuri — Wed, 28 Jun 2017 05:28:29 GMT

Hello,

The schematic (linked below) shows SW2 should be set as 00100000 to boot SD1

Design files for i.MX 7Dual

Summary page :

i.MX 7Dual SABRE Board|NXP

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Android User's Guide Rev. N7.1.1_1.0.0, 03/2017 in i.MX Processors

Android User's Guide Rev. N7.1.1_1.0.0, 03/2017

Re: Android User's Guide Rev. N7.1.1_1.0.0, 03/2017