Question, i.MX6Q DDR3 selection.

SLICE — Wed, 10 May 2017 07:23:05 GMT

Dear team,

I would like to ask about DDR controller of i.MX6Q.

My customer wants to use DDR3-800 instead of DDR3-1066 for their board because of its distribution amount.

If you have any concern on that, please let me know.

The customer concerns if there is any restrictions on margin for selecting DDR chip.

Thanks,

Miyamoto

Re: Question, i.MX6Q DDR3 selection.

Yuri — Wed, 10 May 2017 09:20:36 GMT

Hello,

It is needed to configure memory frequency for 400 MHz, when using DDR3-800.

https://community.nxp.com/docs/DOC-105963

i.MX6/7 DDR Stress Test Tool V2.60

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Question, i.MX6Q DDR3 selection. in i.MX Processors

Question, i.MX6Q DDR3 selection.

Re: Question, i.MX6Q DDR3 selection.