i.MX ProcessorsのトピックRe: Cannot Blow efuses with MFG Tool https://community.nxp.com/t5/i-MX-Processors/Cannot-Blow-efuses-with-MFG-Tool/m-p/672785#M103650 <HTML><HEAD></HEAD><BODY><P>Hi Nacho</P><P></P><P>please check</P><P><A href="https://community.nxp.com/thread/445684">Burning fuse bits using MFGTool on i.MX6UL-EVK</A>&nbsp;</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 09 May 2017 23:33:48 GMT igorpadykov 2017-05-09T23:33:48Z Cannot Blow efuses with MFG Tool https://community.nxp.com/t5/i-MX-Processors/Cannot-Blow-efuses-with-MFG-Tool/m-p/672784#M103649 <HTML><HEAD></HEAD><BODY><P>We added this lines to MFG TOOL to perform this equivalent uboot fuse prog:</P><P>For boot i.mx6Ultralite from SD1 also overriding resistors (wer have no resistors on custom board)<BR /><BR /></P><P>FINAL FUSES:</P><P></P><P>FUSE PROG 0 5 0X00000040<BR />FUSE PROG 0 6 0X00000010<BR /><BR />So we´ve added this lines to MFGTool<BR /><BR /></P><P><span class="lia-inline-image-display-wrapper" image-alt="1.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/19185i547757BCA637BA8F/image-size/large?v=v2&amp;px=999" role="button" title="1.png" alt="1.png" /></span><BR />But it Fails<BR /><span class="lia-inline-image-display-wrapper" image-alt="2.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/19280iA52B577FFC420AFD/image-size/large?v=v2&amp;px=999" role="button" title="2.png" alt="2.png" /></span><BR /><BR />What´re we doing wrong?<BR /><BR />Thank You In Advance</P></BODY></HTML> Tue, 09 May 2017 14:39:24 GMT https://community.nxp.com/t5/i-MX-Processors/Cannot-Blow-efuses-with-MFG-Tool/m-p/672784#M103649 nachodiz 2017-05-09T14:39:24Z Re: Cannot Blow efuses with MFG Tool https://community.nxp.com/t5/i-MX-Processors/Cannot-Blow-efuses-with-MFG-Tool/m-p/672785#M103650 <HTML><HEAD></HEAD><BODY><P>Hi Nacho</P><P></P><P>please check</P><P><A href="https://community.nxp.com/thread/445684">Burning fuse bits using MFGTool on i.MX6UL-EVK</A>&nbsp;</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 09 May 2017 23:33:48 GMT https://community.nxp.com/t5/i-MX-Processors/Cannot-Blow-efuses-with-MFG-Tool/m-p/672785#M103650 igorpadykov 2017-05-09T23:33:48Z