topic Re: Manufacturing Tools alternative for i.MX6ULL programming in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670889#M103334 <HTML><HEAD></HEAD><BODY><P>Hi Chad</P><P></P><P>please try steps described in sect.4.3.2 Copying the full SD card image</P><P>attached Linux Guide.</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 22 Jun 2017 23:28:29 GMT igorpadykov 2017-06-22T23:28:29Z Manufacturing Tools alternative for i.MX6ULL programming https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670888#M103333 <HTML><HEAD></HEAD><BODY><P>Is there an alternative to Manufacturing Tools to program a micro SD card for use in an i.MX6ULL? &nbsp;Manufacturing Tools simply does not work for me (I constantly get "No Device Connected" when I attempt to program via this tool).</P></BODY></HTML> Thu, 22 Jun 2017 19:51:09 GMT https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670888#M103333 chadwolter 2017-06-22T19:51:09Z Re: Manufacturing Tools alternative for i.MX6ULL programming https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670889#M103334 <HTML><HEAD></HEAD><BODY><P>Hi Chad</P><P></P><P>please try steps described in sect.4.3.2 Copying the full SD card image</P><P>attached Linux Guide.</P><P></P><P>Best regards<BR />igor<BR />-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 22 Jun 2017 23:28:29 GMT https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670889#M103334 igorpadykov 2017-06-22T23:28:29Z Re: Manufacturing Tools alternative for i.MX6ULL programming https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670890#M103335 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>&nbsp; hope the following also helps&nbsp;<A href="https://community.nxp.com/docs/DOC-334664">https://community.nxp.com/docs/DOC-334664</A>&nbsp;</P><P></P><P>Regards,</P><P>Yuri.</P></BODY></HTML> Fri, 23 Jun 2017 03:37:02 GMT https://community.nxp.com/t5/i-MX-Processors/Manufacturing-Tools-alternative-for-i-MX6ULL-programming/m-p/670890#M103335 Yuri 2017-06-23T03:37:02Z