topic Re: AnTuTu doesn't work on MCIMX7SABRE in i.MX Processors

AnTuTu doesn't work on MCIMX7SABRE

ko-hey — Wed, 12 Jul 2017 04:45:34 GMT

Hi all

I want to use AnTuTu for comparing the i.MX7 CPU performance.

However, it doesn't work and got two following error.

Does someone use AuTuTu with MCIMX7SABRE ?

Could someone give me advise to resolve this issue ?

Here is my environment and I attached the log when I click those icons.

------------------------------------------

Android: N7.1.1 (Demo image download from NXP)
AnTuTu Benchmark: 6.3.3
Board: MCIMX7SABRE
Display: LCD8000-43T

------------------------------------------

1. Error message when I click AnTuTu icon

2. Error message when I click "Open app again" message

Ko-hey

Original Attachment has been moved to: error_message-AnTuTu-Benchmark-has-stopped.txt.zip

Original Attachment has been moved to: error_message-AnTuTu-Benchmark-keeps-stopping.txt.zip

Re: AnTuTu doesn't work on MCIMX7SABRE

diegoadrian — Thu, 13 Jul 2017 13:32:23 GMT

Hello,

Thank you for writing.

Have you tried to ask directly to the AnTuTu developers?

Because, unfortunately, we do not give support to Android applications.

Best Regards,

Diego

Re: AnTuTu doesn't work on MCIMX7SABRE

ko-hey — Fri, 14 Jul 2017 02:04:06 GMT

Hi diegoadrian‌

Thank you for reply.

I've never asked to AnTuTu developers because I don't know the link.

Do you know ?

Add info:

I tried following thread but not work well.

https://community.nxp.com/thread/448760

Ko-hey

Re: AnTuTu doesn't work on MCIMX7SABRE

diegoadrian — Fri, 14 Jul 2017 16:20:50 GMT

Probably in this email, they can help you.

marketing@antutu.com

Regarding the selinux authority problem, during the booting process, before the kernel start up, you need to press any key of your keyboard, after that, you can change the "bootargs". The "bootargs" can vary depending of your setup.

This is an example of how to boot whit a single LDVS display:

U-Boot > setenv bootcmd boota mmc0

U-Boot > setenv bootargs console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale androidboot.selinux=disabled

androidboot.dm_verity=disabled

U-Boot > saveenv

I hope this can help you.

Best Regards,

Diego.

Re: AnTuTu doesn't work on MCIMX7SABRE

ko-hey — Tue, 18 Jul 2017 02:58:05 GMT

Hi diegoadrian‌

Thank you for the information of AnTuTu.

I'll ask them.

P.S.

I tried your suggested command but not work well.

Ko-hey