i.MX ProcessorsのトピックRe: IMX6 solo processor we are using CSI1 for Video decoder O/P?

IMX6 solo processor we are using CSI1 for Video decoder O/P?

ramesh6663 — Fri, 03 Feb 2017 10:21:11 GMT

Hi,

In our IMX6solo processor design we are using CSI1 interface (EIM) instead of CSI0 for camera. could you please provide the details how to make this port enable and any Software effort is required for this?

Please help us to provide technical document which can explain How to configure CSI1 interface.

we are using NXP SabreSD BSP.

Thanks & Regards,

Rameshkumar

Re: IMX6 solo processor we are using CSI1 for Video decoder O/P?

jamesbone — Fri, 03 Feb 2017 18:49:36 GMT

You can take a look to this thread,

https://community.nxp.com/thread/309260

Re: IMX6 solo processor we are using CSI1 for Video decoder O/P?

ramesh6663 — Sat, 04 Feb 2017 09:12:14 GMT

Thanks for your link, but we are using CSI0 8bit parallel interface configuration.

Could you please let me now the details where i will get for Video decoder output 8 bit Ycbcr to CSI0 enabling configuration codes?

I am new to this processor.

Thanks & Regards,

Ramesh