IMX6QP : Validate sensor data

kishorr — Thu, 23 Feb 2017 15:07:42 GMT

I am working on IMX6QP based custom hardware. We are able to read the sensor data from accelerometer, magnetometer and gyroscope. Looking for some applications that can be used to validate the data on ubuntu. Any suggestions most welcome.

sample data read from sensors:

echo "$a_x/$a_y/$a_z $m_x/$m_y/$m_z"

65352/65192/16584 192/239/65405

65344/65192/16368 213/232/65413

echo "$g_x/$g_y/$g_z"
32/24/65535
29/23/65534

Thanks

Kishor

Re: IMX6QP : Validate sensor data

igorpadykov — Sun, 26 Feb 2017 23:03:34 GMT

Hi Kishor

for sensor aplplications one can look at attached i.MX53 SMD board Linux Manual,
seems these could be easily ported for i.MX6. BSPs for Sabre for Tablet can be found on
http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx53-software-and-development-tool-resources:IMX53_SW

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic IMX6QP : Validate sensor data in i.MX Processors

IMX6QP : Validate sensor data

Re: IMX6QP : Validate sensor data