How to connect a NAND Flash with the i.MX6 microprocessor

carlosreverbel — Wed, 05 Apr 2017 21:43:57 GMT

Hello,

I am working on a project to build a custom board for the i.MX6D microprocessor and I would like to use mfgtool to save the bootloader and the O.S. in a NAND Flash chip. The problem is that I cannot find which pins of the microprocessor to connect to the NAND Flash. Could you provide me an schematic showing how to connect the chip to the i.MX6D microprocessor?

Thank you.

Re: How to connect a NAND Flash with the i.MX6 microprocessor

Yuri — Mon, 25 Sep 2017 05:55:19 GMT

Hello,

please refer to the SABRE for Automotive Infotainment:

https://www.nxp.com/webapp/Download?colCode=SABRE-AI-QUAD-CPU2&Parent_nodeId=1413216565594727840052&Parent_pageType=prod…

https://www.nxp.com/webapp/Download?colCode=SABRE-AI-DUALLITE-CPU2&Parent_nodeId=1413216565594727840052&Parent_pageType=…

SABRE-2|Automotive-Infotainment|i.MX6|NXP

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックRe: How to connect a NAND Flash with the i.MX6 microprocessor

How to connect a NAND Flash with the i.MX6 microprocessor

Re: How to connect a NAND Flash with the i.MX6 microprocessor