FreeMASTER中的主题 Re: Why are values never displayed in free Master

Why are values never displayed in free Master

stone123 — Mon, 20 Dec 2021 08:30:43 GMT

Using DEVKIT-MPC5744P

I am tyring to connect the development board to the FREE MASTER v2.0 through OSJTAG.The connection mode I chose is as follows：

step one:

step two:

step three:

step four:

step five:

step six:

step seven:

Although the software shows that I am connected, the data cannot be updated. So I'd like to ask, what's wrong with my operation steps? Is the connection mode selected wrong? Can someone show me the correct operation? Thank you.

Re: Why are values never displayed in free Master

MichalH — Tue, 21 Dec 2021 11:45:04 GMT

Hello,
can you try to use the option P&E Nexus/OSBDM PowerPC?

I also recommend to upgrade to the latest FreeMASTER 3.1.3 as available on the nxp.com/freemaster. This version has more recent version of P&E drivers and it may work better in this case.

Regards,
Michal

Re: Why are values never displayed in free Master

stone123 — Wed, 22 Dec 2021 07:22:34 GMT

Thank you very much for your reply!! I've solved the problem. The problem was due to the wrong connection.Your suggestion is very effective.