topic Re: Some problem about FreeMASTER on CAN in FreeMASTER

Some problem about FreeMASTER on CAN

xflong — Thu, 16 Jul 2020 10:30:32 GMT

In my S32K144's project ,I atteched FreeMASTER driver v2.0. I readed the user guide,and followed the instruction.

I created the project with Processer Expert, use can0 pal for communication.

modify the "freemaster_cfg.h":

#define FMSTR_POLL_DRIVEN 1 /* No interrupt needed, polling only */

#define FMSTR_USE_FLEXCAN 1 /* To select FlexCAN communication interface */
#define FMSTR_CAN_CMDID 0x7aa /* incoming (command) CAN message ID */
#define FMSTR_CAN_RESPID 0x7ab /* response CAN message ID, may be the same as command ID */

In "main.c",call the init function and then poll in the for loop.

CAN_Init(&can_pal1_instance, &can_pal1_Config0);

FMSTR_Init();

for(;;)
{
FMSTR_Poll();
}

I connect the PC host,the MCU can only send one CAN message every one reset.

I have upload the project.Could anyone help me？

Re: Some problem about FreeMASTER on CAN

MichalH — Mon, 20 Jul 2020 07:01:17 GMT

Dear flony zhang,

I confirm I'm facing the same behavior when using the project that you have sent. We are looking at the issue now and will reply as soon as we have a solution.

Thanks,

Michal

Re: Some problem about FreeMASTER on CAN

iulian_stan — Mon, 20 Jul 2020 18:25:56 GMT

Hi zhangbo@greatpowertech.com‌,

I noticed that in the latest SDK version (3.0.0) CAN Initialization by default enables Transmission abort mechanism (53.5.7.1 Reference Manual), and it seems it is not handled by FreeMASTER Driver that leads to all tx operations to fail, but the first one. A quick fix would be to disable it after CAN_Init call. Here's a short snippet:

/* Enter Freeze mode */

CAN0->MCR |= (CAN_MCR_FRZ_MASK | CAN_MCR_HALT_MASK);

CAN0->MCR &= ~CAN_MCR_MDIS_MASK;

while((CAN0->MCR & CAN_MCR_FRZACK_MASK ) == 0){}

/* Disable abort mechanism MCR[AEN] = 0 */

CAN0->MCR &= ~CAN_MCR_AEN_MASK;

/* Enable the FlexCAN module */

CAN0->MCR &= ~(CAN_MCR_FRZ_MASK | CAN_MCR_HALT_MASK);

Regards,

Iulian

Re: Some problem about FreeMASTER on CAN

xflong — Tue, 21 Jul 2020 09:32:31 GMT

Thanks,Michal.

Re: Some problem about FreeMASTER on CAN

xflong — Tue, 21 Jul 2020 09:33:27 GMT

Thanks,Iulian.

It works.