https://community.nxp.com/t5/FreeMASTER/Speed-deviation/m-p/1691713#M1390 <P>Using the official routine, the phase current frequency was measured at 25000 rpm, and it was found that the speed exceeded 200 rpm. When asked how to reduce it, freemaster was used, and the expected speed was consistent with the actual speed</P> Tue, 25 Jul 2023 02:07:50 GMT zhouqicheng 2023-07-25T02:07:50Z https://community.nxp.com/t5/FreeMASTER/Speed-deviation/m-p/1691713#M1390 <P>Using the official routine, the phase current frequency was measured at 25000 rpm, and it was found that the speed exceeded 200 rpm. When asked how to reduce it, freemaster was used, and the expected speed was consistent with the actual speed</P> Tue, 25 Jul 2023 02:07:50 GMT https://community.nxp.com/t5/FreeMASTER/Speed-deviation/m-p/1691713#M1390 zhouqicheng 2023-07-25T02:07:50Z https://community.nxp.com/t5/FreeMASTER/Speed-deviation/m-p/1704263#M1407 <OL><LI>The type of system you're working with (e.g., industrial machinery, automotive, robotics).</LI><LI>The specific component or device whose speed you were adjusting.</LI><LI>Any error messages or issues you encountered before using freemaster.&nbsp;<A href="https://www.tellpopeyes.biz/" target="_self">TellPopeyes</A></LI><LI>The steps you took within the freemaster tool to align the expected speed with the actual speed.</LI></OL> Wed, 16 Aug 2023 04:08:38 GMT https://community.nxp.com/t5/FreeMASTER/Speed-deviation/m-p/1704263#M1407 victormarcel09 2023-08-16T04:08:38Z