topic Re: Problem with eiq training ssd_mobilenet_v3 process in eIQ Machine Learning Software

Problem with eiq training ssd_mobilenet_v3 process

hanyanze — Tue, 15 Mar 2022 08:56:01 GMT

When I used eiq for target detection training, I chose the ssd_mobilenet_v3 model under BASE MODEL. Since I trained three categories of boxes, the accuracy rate during the training process has always been the highest at 75%, which will not exceed this value. I don't understand, change It becomes 66.7% with the highest accuracy of the two categories. Do I need to set any background? But I didn't find the relevant settings.

At the same time, the accuracy and loss of the validation dataset are not normal. There is no problem with the dataset, I tried it in my own neural network.

Re: Problem with eiq training ssd_mobilenet_v3 process

david_piskula — Wed, 16 Mar 2022 07:53:16 GMT

Hello @hanyanze,

could you please provide me with the dataset and a list of the exact settings you use, so that I can attempt to reproduce your issue and report it to the development team in case it's a bug in the tool?

Also, please let me know the version of your eIQ Portal installation.

Best Regards,

David

Re: Problem with eiq training ssd_mobilenet_v3 process

iris_wen — Tue, 22 Mar 2022 02:52:08 GMT

Hi @david_piskula ,

I have reproduced this issue and reported to R&D.

Re: Problem with eiq training ssd_mobilenet_v3 process

iris_wen — Tue, 22 Mar 2022 03:48:13 GMT

One update from R&D: this issue will be fixed in eIQ protal 2.4.8.

Re: Problem with eiq training ssd_mobilenet_v3 process

hanyanze — Tue, 22 Mar 2022 10:35:11 GMT

收到！